- ページ 10

DVR Epcom XMR SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epcom XMR Series 17 ページ。 Fhd dual lens dash cam with gps
Epcom XMR Series にも： ユーザーマニュアル (14 ページ), ユーザーマニュアル (12 ページ), ユーザーマニュアル (8 ページ)

ページを印刷する
Epcom XMR Series ユーザーマニュアル
Media :
ID
1
Post-recording
2
Pre-recording
3
Motion detect
4
Security password
5
GPS watermark
6
Communication tone
7
Media Volume
8
Warn tone
9
Hourly notice
1. Pre-recording
Pre-recording saves an additional seconds of video before the video recording button is pressed,
and the additional seconds is about 30 seconds. After the option of pre-recording is enabled, the
camera can not snapshot, but the snapshot will work during the video recording.
For example, we set the value(between setting the pre-recording and pressing the video recording
button) as X, if X <30s, the camera will store an additional video for X seconds before the video
recording button is pressed, if X>=30s, the camera will store an additional video for 30 seconds
before the video recording button is pressed.
2. Post-recording
Post-recording means how long the camera should continue to record after the video recording
button is pressed to stop recording.
3. Motion detect
When the option is on, if there is something moving in the camera, the camera will start to
recording. You can press the recording button to stop recording.
4. Security password
When this option is on, you have to type in the password if you want to playback and do
configurations, the default password is:000000.
5. GPS watermark
When the option is on, the GPS info will display in the video image, even in the recorded video
and streaming video.
Menu
Options
10sec, 30sec, 1min, 2min, 5min, 10min, 30min, OFF
OFF, ON
ON, OFF
ON/OFF, default is 000000
OFF, ON
Voice, beep
Drag the icon to adjust
Beep, Voice
ON, OFF
8