ページを印刷するencode with big bit rate.
3. Video clip
Video clip selection defines the length of each video segment, and this option only is used for
video recording, invalid for audio recording.
Sub-option: Auto, 10 minutes, 20 minutes, 30 minutes; auto means it will create a file in almost
2GB size, and the time is about one hour, depends on the video resolution.
4. Pre-recording
Pre-recording saves an additional seconds of video before the video recording button is pressed,
and the additional seconds is about 30 seconds. After the option of pre-recording is enabled, the
camera cannot snapshot, but the snapshot will work during the video recording.
For example, we set the value(between setting the pre-recording and pressing the video recording
button) as X, if X <30s, the camera will store an additional video for X seconds before the video
recording button is pressed, if X>=30s, the camera will store an additional video for 30 seconds
before the video recording button is pressed.
5. Video loop
When you create one new video recording file, if the file size is more than the remaining storage
of camera, the camera will delete the most original file, so that the new file can be saved.
Here if the video file is tagged as imp file, the imp file cannot be deleted.
6. Indicate sound
This option means when the user operates camera, it will give the corresponding response, OFF,
beep or voice, and it will applied to the operations as follows:
1. Start video recording;
2. Stop video recording;
3. Power on the camera;
4. Power off the camera;
5. Low battery;
6. Inadequate storage space;
7. Indicate light
Select to turn all the LED ON or OFF, including the status LED and power LED.
8. Vibration
7