- ページ 13

電源 Dictator RZ-24-05 CentralのPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。Dictator RZ-24-05 Central 13 ページ。
Dictator RZ-24-05 Central にも：テクニカル・マニュアル (12 ページ)

ページを印刷する

Technical manual: Central unit RZ-24-05

7.2 TROUBLESHOOTING

Error

Detection loop cannot

be reset

Error LED lights up per-

manently yellow

Key "Close door" does

not work

Key "RESET" does not

work

Electromagnets don't

work

Warning signal does not

work

DICTATOR Technik GmbH · +49 (0)821 246730 · [email protected] · en.dictator.de · 20.05.13

Measure

Check whether the RZ-24-05 can be reset with a 3.9 kΩ resistor

on terminals and 2. If not, check whether the control module is

correctly inserted in the terminal board. If the problem persists,

replace the control module. If resettable with a 3.9 kΩ resistor on

terminals 1 and 2, check the external detection loop step by step.

Is a 3.9 kΩ resistor in the last detector? Is the manual push button

reset and is a correct contact used?

Voltage from power supply too low? Please measure.

External load too high? Replace the power supply unit if neces-

sary.

Control module defective, replace it.

Replace the control module.

Check the cable path from the terminal board to the electromag-

nets.

Replace the terminal board.

Check the cable path from the terminal board to the warning

signal device.

Replace the terminal board.

Protronic

Z-6.510-2435

VDS