- ページ 3

プリントサーバー Axis 150のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Axis 150 8 ページ。 High performance multiprotocol print server for virtually all networks

NetWare

By following the instructions detailed below, install your AXIS

150/152 with the AXIS NetPilot™ installation Wizard. Please note

that the AXIS NetPilot™ software requires a Windows platform

that uses NetWare or NetBIOS/NetBEUI.

1. Load the AXIS NetPilot™ software by following the instructions

on the label of the AXIS Utilities diskette. After loading the

software, double click on the AXIS NetPilot™ icon. AXIS

NetPilot™ then scans the network of all connected Axis

Network Print Servers.

2. AXIS units previously installed using the AXIS NetPilot™

appear as 'Network Print Servers' and un-installed units are

featured as 'New Axis Units'. Select your AXIS 150/152 from the

'New Axis Units' sub-folder and then click the Install icon. The

installation Wizard guides you through the basic installation.

Click the Help icon should you require assistance throughout any

stage of the operation.

To set up print queues:

1. Open the 'Network Print servers' folder and select the Network

Print Server you wish to set up.

2. Choose 'Network' from the Toolbar or Setup menu.

3. A new 'Network environments' window will now be open. From

this window you may create new print queues, connect to

previously established queues, and/or select the mode of

operation (Print Server or Remote Printer) for each printer.

To set up the advanced operating parameters:

1. Open the 'Network Print Server' folder and select the Network

Print Server you wish to setup.

2. Choose 'Properties' from the Toolbar or Setup menu.

3. A set of "tabbed" Property Pages will open which allow you to

refine the chosen mode of operation. e.g. password protection,

frame type selection and/or setting of the queue polling interval.

The NetWare Configuration is now complete and you can close the

AXIS NetPilot™.

To verify that the AXIS 150/152 is functioning correctly, we

recommend that you print a document from within a Windows

application, e.g. Microsoft Word. Please ensure that your printer is

selected as the Active Printer!

Windows

Supplied on the AXIS Utilities diskette, the AXIS Print Monitor

should be used for network printing within Windows 95 and

Windows NT environments. It allows AXIS Network Print Servers

to be connected in the same simple fashion as a local printer port and

once installed, is automatically initialized upon system startup.

NetWare