ウィンドウ・ブラインド Alpha Motors WSERD30BのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Alpha Motors WSERD30B 4 ページ。

ページを印刷する

1. TECHNICAL SPECIFICATIONS

Protection index: IP20

Up to 15 remotes can be assigned

to each motor.

2. CHARGING AND WAKING UP

Please charge the motor using charger 16.8V/1A before operation.

The motor won't function until it has been charged.

Waking the motor up for the ﬁrst time:

Method A

Plug ALDC charger into charging port

for a few seconds till motor vibrates.

Method B

Press and hold white motor head button for

6 seconds, green LED will ﬂash 3 times and then turn red.

3. CODE LEARNING

Press the button on the head for

1 second, the motor will vibrate.

4. CHANGING THE RUNNING DIRECTION

Method A.

Press motorhead's button for about 5 seconds until the motor vibrates.

Method B.

Press UP and DOWN buttons

simultaneously.

5. TURN ON STEP BY STEP FUNCTION

Note: If the motor is in step-by-step mode, pressing the UP or DOWN button for 3s will make the motor will run continuously.

Press UP and DOWN buttons

simultaneously.

WSERD30B MOTOR GUIDE p1

ALPHA SUPPORT PHONE (02) 4355 4775

Received frequency: 433.92MHz

Charging: 16.8V/1A

OTOR

Press UP and DOWN

together and release.

Long press for 5 seconds

Press the STOP button

6 times within 10s.

The motor will move in small increments unless the button is held down.

Press the STOP button

2 times within 10s.

Charging port

Press the STOP button once,

the motor will vibrate.

Press the DOWN button once

within 10s, the motor will vibrate.

Press the UP button once within

10s, the motor will vibrate.

Code: Rolling

Charge time: 6 hours

Programming button

The remote should now

control the motor.

The motor's running direction is reversed.

The motor's running direction

is reversed.

The motor will run

step by step.