- ページ 4

プリントサーバー Axis 5800のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Axis 5800 13 ページ。 Axis communications print server product brochure
Axis 5800 にも：仕様 (6 ページ)

ページを印刷する

Step

Windows only: Set the IP Address Manually

If you succeeded in logging in to your print server's web pages in Step 2, your print server has

already received a valid IP address. Skip to " Configure a Printer " (Step 4)!

Use AXIS Print System version 1.20 (described here) or AXIS IP JumpStarter to set the IP

address of print servers with firmware version 6.20 and above. AXIS Print System and AXIS

IP JumpStarter are available on the AXIS Product CD and on www.axis.com. AXIS Print System

is software used for setting the IP address of a print server and for configuring network

printers. It can be used in Windows 95, 98, NT and 2000.

Set the IP address:

1. Download AXIS Print System version 1.20 (or higher) to your host and install it.

2. From the AXIS Print System Available Printers/Print Servers view, select the unconfigured

Axis print server icon:

3. Double-click the print server icon. The AXIS Print System Add Printer Wizard will appear.

The print server will have a temporary IP address, which was assigned to it through

Auto-IP. The default Auto-IP address structure is: 169.254.xxx.xxx. This temporary IP

address should be changed to a new and unused one:

4. In the IP Address field, enter the new IP address of the print server.

5. Set the Subnet Mask and Default Gateway according to your network configuration. Click

Next> to continue.

6. Next, you will be prompted to enter an Administrator password, the default password is

pass. Click OK.

7. Next, AXIS Print System will start looking for printers attached to the print server. Click the

radio-button next to the printer you want to add to My Printers and click Next>. Continue

to Configure a Printer in Windows 95, 98, NT & 2000, on page 7 to install an appropriate

printer driver.

ATTENTION!

AXIS IP Installer is not compatible with firmware 6.20 and above!

Notes:

Click the AXIS Print System Help button for information on the Default Gateway and

Subnet Mask.

AXIS Print System can be installed for both Client-Server and Peer-to-Peer printing. For

Peer-to-Peer printing, AXIS Print System needs to be installed on each workstation. The

print server will then, together with AXIS Print System, emulate the behavior of a local

printer port. For Client-Server printing, AXIS Print System can be used to create printer

objects on one server. The installed printers must then be configured to be shared to allow

clients to use them.