- ページ 4
スイッチ Alpha Networks SNX-60x0-486F SeriesのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Alpha Networks SNX-60x0-486F Series 6 ページ。 Data center switch
ページを印刷するSNX-60x0-486F Series Data Center Switch
The figure below illustrates how to properly insert
SFP+ and QSFP+ transceivers into the switch's ports.
Figure 6 - Installing Transceivers into the Transceiver Ports
Connect the Power Cable
Connect one end of the AC power cord, included in
the package, into the grounded electrical outlet at
the site and insert the other end of the AC power
cord into the AC power receptacle of the AC power
supply module on the back panel of the switch. The
switch will automatically adjust the voltage supplied
to the voltage needed as this power supply supports
any voltage power supply in the range from 100VAC
to 240VAC at 50Hz to 60Hz.
The LED indicators on the front panel of the switch
should come on.
Safety Instructions
The following sections provide safety precautions to
follow when installing the switch.
Safety Precautions
For your protection, observe the following safety
precautions when setting up your equipment:
Follow all cautions and instructions marked on the
equipment.
Only trained and qualified personnel are allowed to
install or to replace this equipment.
Never push objects of any kind through openings in
the equipment. Dangerous voltages may be present.
Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or damage
to your equipment.
This product is intended for restricted access whereby
access is controlled through the use of a means of
security (for example, key, lock, tool, badge access) and
personnel authorized for access have been instructed
on the reasons for the restrictions and any precautions
that need to be taken.
Remove all metal jewelry, such as rings and watches,
before installing or removing the device.
Do not look directly at the fiber optic cable ends or
inspect the cable ends with an optical lens.
Do not install in direct sunlight, or a damp or dusty
place.
Do not expose the device to moisture or water.
Disconnect all power supply cords before servicing.
Electrical Safety Precautions
For your protection, observe the following electrical
safety precautions when setting up your equipment:
Ensure that the voltage and frequency of your power
source match the voltage and frequency inscribed on
the equipment's electrical rating label.
This switch is designed to work with power systems
having a grounded neutral. To reduce the risk of
electric shock, do not plug the switch into any other
type of power system. Contact your facilities manager
or a qualified electrician if you are not sure what type
of power is supplied to your building.
Not all power cords have the same current ratings. Do
not use the power cord provided with your equipment
for any other products or use. Household extension
cords do not have overload protection and are not
meant for use with these switches. Do not use
household extension cords with this product.
To prevent electric shock, do not remove the cover of
this product. There are no user-serviceable parts inside.
This unit contains hazardous voltages and should only
be opened by a trained and qualified technician.
Do not work on equipment or cables during periods of
lightning activity.
Check to see if there are any exposed copper strands
coming from the installed wire. When this installation is
done correctly there should be no exposed copper wire
strands extending from the terminal block. Any
exposed wiring can conduct harmful levels of electricity
to persons touching the wires.
The power source for the device should be located near
the unit and should be easily accessible.
Circuit Overloading: Consideration should be given to
the connection of the equipment to the supply circuit
and the effect that overloading of circuits might have
on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate
ratings should be used when addressing this concern.
Warning: A readily accessible disconnect device shall
be incorporated in the building installation wiring.
4
Quick Installation Guide