- ページ 15

モニター Alpha Omega Instruments OXY-SENのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alpha Omega Instruments OXY-SEN 15 ページ。 Oxygen monitor

Appendix A

Material Safety Data Sheet for the 2SEN Oxygen Sensor

SECTION VI - SPILL AND DISPOSAL PROCEDURES

NOTE: The sensors are sealed, and under normal circumstances, the contents of the

sensors do not present a health hazard. The following information is given as a guide in the

event that a cell leaks.

Steps to be taken in the event of a spill or discharge:

Wear respiratory protection and full protective clothing

Neutralize spill with soda ash or lime

Carefully place material into clean, dry container and cover.

Flush spill area with water.

Disposal Procedure:

Dispose in accordance with all applicable federal, state and local environmental regulations, with regards to lead or lead acetate.

EPA Hazardous Waste Numbers:

Lead

Lead Acetate

Acetic Acid, Glacial

SECTION VII - ENGINEERING AND WORK PRACTICES CONTROLS

VENTILATION:

RESPIRATORY PROTECTION:

EYE/SKIN PROTECTION:

Protective measures during cell replacement:

Before opening the packaging containing the sensor cell, check the sensor cell for leakage. If the sensor

cell leaks, do not open the container. If there is liquid around the cell while in the instrument, use the

protection listed above in this section.

SECTION VIII - STORAGE AND HANDLING PRECAUTIONS

Storage Requirements:

NOTE: The above data is based on tests and experience which Alpha Omega Instruments, Inc. believes reliable and are

supplied for information purposes only. Alpha Omega Instruments Corp. disclaims any liability for damage or injury which

results for the use of the data and nothing contained there in shall constitute a guarantee, warranty

(including warranty of merchant ability) or representation (including freedom from patent liability) by

Alpha Omega Instruments Corp. with respect to the data, the product described, or their use for any specific purpose,

even if that purpose is known to Alpha Omega Instruments Corp.

D008

U144 (Toxic Waste)

D001, D002 (Ignitable, Waste)

Use general or local exhaust ventilation to meet TLV requirements.

Respiratory protection required if airborne concentration exceeds TLV.

Safety goggles, uniform, apron, neoprene gloves are recommended.

Store in a cool, well-ventilated area.