- ページ 9

サンダー Alpha Professional Tools AIR-680のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alpha Professional Tools AIR-680 20 ページ。 Pneumatic polisher
Alpha Professional Tools AIR-680 にも：取扱説明書 (20 ページ)

ページを印刷する

Trying to convert either fitting to an American standard pipe thread

(NPT), which is tapered, will crack the Endcase and is not covered

under warranty.

AIR PRessuRe ANd Volume

The recommended air pressure for this tool is 85 PSI. The most

important factor in running this tool is the volume of air being sup-

plied to the tool. The volume is the air consumption needed to run

this tool at a constant speed under light downward hand pressure.

The volume is measured in CFM (cubic foot per minute (ft

need a minimum of 15 CFM per tool.

When choosing a compressor to run an AIR-680 polisher, we recom-

mend a rotary screw type with a minimum of a 5hp motor/15-20 CFM

and a 60 gallon tank, per tool. (I.E. if you want to run four tools, you

will need a compressor with a 20hp motor capability of 80+ CFM and

an 80 to 100 gallon storage tank.)

It is also very important to keep your air cool, dry, and clean, so look for a

compressor with a refrigerated dryer and high-efficiency filter built in or

purchase a separate air dryer and filter unit rated for your compressors

CFM.

RusT PRoTeCTIoN (A rust inhibitor oil is used to protect the

tool from rusting when not in use)

PRoPeR CARe ANd mAINTeNANCe ARe ImPoRTANT

fACToRs IN PReVeNTING ThIs Tool fRom RusTING oN The

INsIde WheN NoT IN use.

At the end of each workday, place 2-3 drops of rust inhibitor oil (in-

cluded with each polisher) directly into the OIL PORT of the pneumatic

tool. After applying the rust inhibitor oil, turn the air valve slightly so

that the oil atomizes into a mist and coats the internal components

of the polisher. If the process is executed correctly, you should see

a mist coming out of the end of the polisher. The Exhaust Hose

(Part No. 658-95) and Hose Clamp (Part No. 1030-1104) need to be

removed to see the mist effect. See the detailed steps on the next

page for adding the oil to the pneumatic polisher.

CAUTION!

/min). You