- ページ 4

カッター Alpha Professional Tools Ecocutter ECC-125のPDF テクニカル・ノートをオンラインで閲覧またはダウンロードできます。Alpha Professional Tools Ecocutter ECC-125 4 ページ。 Dry tile cutting system

Alpha Professional Tools Ecocutter ECC-125 テクニカル・ノート
Make sure the ECC-125 is connected to the "stabilizer" when assembled to the table. The stabilizer will assure the
Ecocutter will make consistent 90 degree cuts.
Make sure the inner belt and outer belt is functioning correctly. These belts drive the pulleys for the fan exhaust that
forces the air flow into the dust bag.
Take care to ensure that the cutting area is clear of debris and no one will be in a position to interfere with the
cutting application.
Before beginning your cut, allow the tool to run for 15 seconds to inflate the dust bag.
Attach side handle for better stability during cutting applications.
When transporting your table between jobs, don't place items on top of the rails as it may damage the rails.
The ECC-125/225 (Ecocutter), dust bag & hose can be used stand-alone for grout removal, concrete profiling, etc.
Have an extra set of belts (inner and outer) on hand.
Refer to the Alpha® Ecocutter Dry Tile Cutting System Instruction Manual for proper setup and usage.
Read and follow the instructions in the operating manual thoroughly.
Reference
For more product information, visit us on the web at www.alpha-tools.com.
Document # 6030 - Rev.-November 2010
www.alpha-tools.com
Page 4 of 4