- ページ 2

IPカメラ Axis A8004-VEのPDF 統合マニュアルをオンラインで閲覧またはダウンロードできます。Axis A8004-VE 6 ページ。 Configure the network video door station for the cybergate service
Axis A8004-VE にも：インストレーション・マニュアル (7 ページ), テックノート (15 ページ)

ページを印刷する

HOW TO – Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS A8004-VE



Introduction

The following document highlights how to add a door station to Axis Camera

Station and then complete further configurations that can be made to meet an

operator's need:

The document explains how to:

 Add a door station to Axis Camera Station.

 Play an audible alert on the client PC when a call from the door station

is being made.

 Create an alarm alert associated with the call (creates alarm log and

pop up).

 To bring the door station video to the front view.

This following configuration has been tested with the following products and

firmware:

AXIS A8004-VE, firmware 5.65.1 and Axis Camera Station 4.2.

Step 1 – Adding a door station

Add the door station as you would a camera:

"Configuration"/ "Add/Edit Cameras"/ "Add"

Select the door station when it is found by the search to add the device to the system. Once

the door station is added give it a name the operator can relate to.

The door station should be available in the live view. When you put the mouse on the screen you will

get an "Open Door" button appear.

If you press the button on the door station the incoming call buttons will appear. You can then answer

or decline the call.

Rev: 1.1, Last updated: 13/05/2015

Rev: 1.1