IPカメラ Axis P1353のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Axis P1353 4 ページ。
ページを印刷する
Configuration guide
Mechanical PTZ configuration on
the AXIS P135X cameras
This document shows how to configure AXIS P135X cameras to control primarily
a PT head and optionally a zoom lens.
1 Configuration steps
Follow the below configuration steps after connecting the PT head to RS-485/RS-422 serial port
of the camera. Connection schemes are available for particular PT head on driver support pages.
General pin assignment is as follows:
Function
RS-485/RS-422 Tx (A)
RS-485/RS-422 Tx (B)
RS-485A alt. RS-485/RS-422
Rx (A)
RS-485B alt. RS-485/RS-422
Rx (B)
Rev: 1.1, Last updated: 02/04/2013
Mechanical PTZ configuration on the AXIS P135X cameras
Pin
1
(Tx+)
2
(Tx-)
3
(Rx+/Tx+ alt Rx+).
4
(Rx-/Tx- alt. Rx-)
Configuration guide
Notes
Tx pair for RS422 and 4-wire
RS-485
Rx
pair
for
all
(combined Rx/Tx for 2-wire
RS-485)
modes
1