- ページ 18
バッテリーチャージャー DieHard 200.71225のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DieHard 200.71225 20 ページ。 Microprocessor controlled, fully automatic operation battery charger with engine starter plus battery and alternator tester for 6 and 12-volt batteries
DieHard 200.71225 にも： オーナーズマニュアル (17 ページ)
ページを印刷する
17.2
Reviving your battery
operate the vehicle, you don't need to wait for the entire charging process.
When the charger displays a battery % of 77 or more, the battery has usu-
ally been charged enough for the vehicle to start and operate normally.
17.3
Completing an interrupted charge
interrupted and restarted after the charger displays a battery % of 85 or
more, the charger could go straight to Maintain Mode. However, if the
original charge was started using 30A, the charge can often be completed
using the 2A rate.
18.
MAINTENANCE INSTRUCTIONS
18.1
Before performing maintenance, unplug and disconnect battery charger
(see sections 6.7 and 7.6).
18.2
After use, use a dry cloth to wipe all battery corrosion and other dirt or oil
from terminals, cords, and the charger case.
18.3
Servicing does not require opening unit, as there are no user-serviceable
parts.
19.
STORAgE INSTRUCTIONS
19.1
Store charger unplugged, in an upright condition. Cord will still conduct
electricity until it is unplugged from outlet.
19.2
Store inside, in a dry, cool place (unless you're using an on-board Marine
Charger ).
19.3
Do not store clips on handle, clipped together, on or around metal, or
clipped to cables.
: If you only wish to charge your battery enough to
: If the charging process has been
16
•
•