- ページ 7
バッテリーチャージャー DieHard 200.71240のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DieHard 200.71240 18 ページ。 Battery charger 50/15/2 amp, 6/12 volt, manual 250 amp engine starter
DieHard 200.71240 にも： 取扱説明書 (19 ページ)
ページを印刷する
ASPARK
NEAR THE BATTERY MAY CAUSE BATTERY EXPLOSION,
TO REDUCE RISK OF A SPARK NEAR BATTERY:
7.t
7.2
7.3
7.4
7.5
7.6
7.7
• Check the polarity Of the battery posts. The POSITIVE (POS, P,+) battery
post usually has a larg'er diaineter than theNEGAT1VE
(NEG, N, -) post.
Attach at least a 24-inch-long 6-gauge (AWG) insulated battery cable to
the NEGATIVE (NEG, N, -) battery post.
Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +)
post of the battery.
Position yourself and the free end of the cable you previously attached to
the NEGATIVE (NEG, N, -) battery post as faraway from the battery as
possible - then connect the NEGATIVE (BLACK) charger clip to the free
end of the cable.
DO not "face the battery when making the final .connection.
When disconnecting the charger, always do so in reverse sequence of
the connecting procedure and break the first connection while as far away
from the battery as practical.
A marine (boat) battenj must be removed ai-_dcharged on shorel To
charge i{ onboard requires equipment specially designed for marine use.
-5-