- ページ 4
リモートスターター DieHard DieHard 200.71990のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DieHard DieHard 200.71990 8 ページ。 Jump starter/dc power source
DieHard DieHard 200.71990 にも： 取扱説明書 (8 ページ)
ページを印刷する
2.
JUMP STARTER/DC POWER SOURCE FEATURES
1
7
6
3.
JUMP-STARTING A vEHICLE
Warning: Failure to follow instructions may cause damage or an explosion.
Read the entire instruction manual before use.
3.1
turn the ignition
3.2
Use in a well-ventilated area.
3.3
Keep clear of fan blades, belts, pulleys and other parts that may cause
injury.
3.4
Place the Jump Starter on a flat, stable surface near the vehicle battery
and away from moving engine parts.
3.5
make sure the rotary power switch on the front panel is in the O (OFF)
position until clamps are connected to the vehicle battery. If plugged into a
110v aC wall outlet, disconnect.
3.6
to prevent sparking, nEvER allow clamps to touch together or to contact
the same piece of metal.
3.7
Clamp the red clamp (+) to the positive terminal of the battery. (For a
negative grounded system.)*
3.8
Clamp the black clamp (-) to an unpainted and unmoving part of the chas-
sis or engine block. the 3-digit display will show the voltage of the battery.
Do not connect the clamp to the carburetor, fuel lines, or sheet-metal body
parts. Connect to a heavy gauge metal part of the frame or engine block.
3.9
If you have connected the clamps backwards, an audio alarm will sound.
DO nOt turn your jump starter on. this could cause serious damage.
Reverse the connections and the audio alarm will stop.
3
2
OFF before making cable connections.
4
1.
2.
3.
4.
5.
5
6.
7.
2
•
•
12v DC Power Outlet
ON/OFF Power Switch
Digital Display
Display Select Push Button
Switch
Replaceable Jaw Battery
Clamps
Rubber Base
Internal Battery Charger
Outlet (not shown)