- ページ 7
リモートスターター DieHard DieHard 200.71990のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DieHard DieHard 200.71990 8 ページ。 Jump starter/dc power source
DieHard DieHard 200.71990 にも： 取扱説明書 (8 ページ)
ページを印刷する
6.2
12v DC Electrical Device Example Run-Time Chart
Appliance Type
Fluorescent Lights, Cellular phones
Radios, Depth Finders, Fans
Camcorders, DvD players, Spotlights
Electrical tools, bilge pumps
Electric Coolers
air Compressors, Car vacuums
*NOTE: Estimated run-times. actual time may vary. times are based on
the internal battery being new, fully charged and operating at room tem-
perature.
7.
SPECIFICATIONS
Internal battery type
nominal voltage
Capacity
DC power Outlet (max. Continuous
Load)
jumper Cables
battery Clamps
Dimensions (H x W x D)
Weight
8.
TO ORDER AND REPLACE JAWS
Part Number: 2299001580
Description: Kit, battery Clamp Rebuild
QTY Per Clamp: 1
8.1
battery Clamp jaw Replacement
•
Secure the clamp in an open position using a vise or equivalent clamping
device. IMPORTANT: make sure the rotary switch on the front panel is in
the O (OFF) position and the jump starter is not plugged into a 120v aC
electrical wall outlet.
•
Unscrew the fastener securing the cables to the rear of the top jaw.
•
Unscrew the fasteners (2) securing the Copper jaws to the plastic clamp.
Remove the jaws and braided cable.
•
Reverse for assembly.
Estimated Power
4 Watts
9 Watts
15 Watts
24 Watts
48 Watts
80 Watts
DieHard maintenance-Free agm Lead
acid
12v DC
22ah
15a
4-gauge 50 Inches Long
Replaceable jaw
16" x 14" x 5"
22 lbs.
5
•
•
Estimated
Time*
50 Hours
25 Hours
13 Hours
7.3 Hours
4.5 Hours
2 Hour