- ページ 9
リモートスターター DieHard Portable Power 1150のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。DieHard Portable Power 1150 11 ページ。 Diehard portable power 1150 battery charger operator's manual
DieHard Portable Power 1150 にも： 取扱説明書 (16 ページ), 取扱説明書 (15 ページ), 取扱説明書 (12 ページ), 取扱説明書 (17 ページ)
ページを印刷する
4,
Once the battery
is fully charged,
the built-in
charger
automatically
switches to float-mode
monitoring,
which trickle charges the battery and
keeps it fully charged without over-
charging so the Portable Power 1150
may be left permanently connected to
the wall outlet.
The internal battery may also be charged
while you drive using just the male-to-
male accessory
cable (included).
Insert
one end of the accessory
cable
into
the 12V DC power outlet and the other
end into the vehicle's
accessory
outlet
(lighter socket). Completely
disconnect
the accessory
cable when the engine is
not running.
[,=-]11[O]
t,f'-'[e = !'-'I_I'] hV_r-'!l_ / 1:1_ El _[o1:1
Charge the 1150 internal battery before
first use and after every use thereafter.
The internal battery will gradually self-dis-
charge (lose power) over time, especially
in warm environments. Leaving the battery
in a discharged state may result in perma-
nent battery damage. To ensure satisfac-
tory performance
and avoid permanent
damage, charge the internal battery every
2 to 3 months. The Portable Power 1150
may be left permanently connected to the
AC wall outlet. Store in a cool dry place.
REPLACING
THE
BUILT-IN
LIGHT
To replace the built-in light bulb:
1.
Turn the light off.
2.
Pop out the protective
plastic lens
cover.
3.
Gently
grasp
the bulb and twist
counter-clockwise
one quarter-turn
to unscrew the bulb.
4.
Insert a replacement bulb of the same
type and rating, and twist clockwise
one quarter-turn
to screw in the new
bulb.
5
Test the light by switching the light on
and off.
6.
Replace the lens cover.
CUSTOMER
TECHNICAL
ASSISTANCE
Customer technical assistance is available
Monday-Friday,
7 am to 4:30 pm Central
Time by phoning 1-800-SEARS-64.