- ページ 7

自動車バッテリー充電器 DieHard 200.71230のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DieHard 200.71230 20 ページ。 Battery charger 40/2 amp manual 200 amp engine starter
DieHard 200.71230 にも：オーナーズマニュアル (14 ページ), オーナーズマニュアル (14 ページ)

ページを印刷する

fOLLOw ThESE STEPS whEN BATTERY IS OUTSIdE vEhICLE.

A SPARK NEAR ThE BATTERY MAY CAUSE A BATTERY EXPLO-

SION. TO REdUCE ThE RISK Of A SPARK NEAR ThE BATTERY:

7.1

Check the polarity of the battery posts. The POSITIVE (POS, P, +) battery

post usually has a larger diameter than the NEGATIVE (NEG, N, -) post.

7.2

Attach at least a 24-inch-long 6-gauge (AWG) insulated battery cable to

the NEGATIVE (NEG, N, -) battery post.

7.3

Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +)

post of the battery.

7.4

Position yourself and the free end of the cable you previously attached to

the NEGATIVE (NEG, N, -) battery post as far away from the battery as

possible – then connect the NEGATIVE (BLACK) charger clip to the free

end of the cable.

7.5

Do not face the battery when making the final connection.

7.6

When disconnecting the charger, always do so in reverse sequence of

the connecting procedure and break the first connection while as far away

from the battery as practical.

7.7

A marine (boat) battery must be removed and charged on shore. To

charge it onboard requires equipment specially designed for marine use.

•