- ページ 3

体重計 Acculab SVI-100EのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Acculab SVI-100E 10 ページ。 Svi series professional precision industrial scale

ENGLISH

Introduction

Thank you for purchasing an Acculab SVI Series Professional Scale. Please read all of the operating

instructions to ensure optimum performance. The unit is pre-calibrated at the factory and is ready to use

with the supplied AC adapter.

Allow 15 to 20 minute warm up time before starting calibration routine in order to give internal

components sufficient time to stabilize.

Avoid lengthy exposure to extreme temperatures. Your scale works best when operated within the

temperature range listed within the specifications.

Place scale platform on solid, level surface.

Keep environment clean, avoid dust, dirt & liquids from getting inside of scale platform and indicator,

which can adversely effect and damage the scale.

Vibrations, air currents and electromagnetic interference may effect the performance of the scale.

Although the scale is very durable, please prevent excessive overloading and dropping objects on to

the platform that may cause permanent damage to the weight cells.

Installation & Operating Instructions

Remove and inspect all contents from package. If you will be mounting the indicator with the provided

bracket we suggest that you install this first (note: please do not remove cable from the base or indicator).

After setting-up the base and the indicator within the desired location plug (included) AC adapter into

main outlet (AC adapter voltage dependent upon local region / only use AC adapter provided with scale.

Use of another type of adapter may permanently damage the scale and void warranty). Turn unit on by

pressing the "ON/OFF" key. Self diagnostic test will automatically run displaying "8.8.8.8." and releasing

to weigh mode with selected unit (Example: "0.000kg"). Scale is ready for use. For additional features and

operation please see "Key Functions / Description" and "Features".

One 9 volt Alkaline or 9 volt NICAD rechargeable battery is required (not included with scale). To install

battery, open battery cover located on the back of the indicator. Connect battery to the leads accordingly

and install within holder and replace cover. It is recommended to remove battery when scale is not in use

for extended periods. Also replace low or dead batteries.

Note: Back-lit display is "off" unless activated with "Light" key.