- ページ 10
デジタルカメラ Olympus 80 - Stylus 80 Quartz Date 35mm CameraのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Olympus 80 - Stylus 80 Quartz Date 35mm Camera 13 ページ。 Stylus 80 instruction manual (portuguese)
Olympus 80 - Stylus 80 Quartz Date 35mm Camera にも： (インストラクション (13 ページ), (フランス語）雇用形態 (13 ページ), (ポルトガル語）マニュアル (13 ページ)
ページを印刷する
RC-300C (Optional)
18
If the selftimer/remote control indicator doesn't blink even
when you press the button, replace the battery with a new
one (CR2025).
How to replace the battery of the remote control (RC-300C)
1
2
3
1. Turn the screw on the bottom of the
remote control counterclockwise to
loosen.
2. Turn the remote control over, and
remove the cover. Remove the old
battery and insert a new battery
with
facing up as shown.
3. Replace the cover, turn the remote
control over, and turn the screw on
the bottom clockwise to tighten.
CORRECTING THE DATE AND TIME
( Quartzdate models only )
Be sure to correct the date and time after the battery has
been inserted or replaced.
1. Open the lens barrier.
1
2. Press the SET button to adjust the
2
3. Press the MODE button once more
3
4
4. Repeat Steps 2 and 3 to set "hour"
5. When "minute" has been set, press
5
Keep the MODE button pressed
until the "year" indicator starts
blinking.
"year" indicator. If you press the
button once, the number on the
display will advance by 1. If you
keep the button pressed, the
numbers will run in rapid
succession. If you pass the
intended number, keep pressing to
return to that number.
to make the "month" indicator
blink. Press the SET button to
adjust the "month" indicator. As
you press the MODE button, the
blinking indicator changes in the
order of "year", "month", "day",
"hour" and "minute".
and "minute". Make sure the
"minute" indicator is blinking.
the MODE button. None of the
indicators will be blinking and date/
time correction is now complete.
19