- ページ 2

デジタルカメラ Olympus CAMEDIA C-100のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Olympus CAMEDIA C-100 2 ページ。 Olympus camedia digital camera quick start guide
Olympus CAMEDIA C-100 にも: 操作マニュアル (23 ページ), クイック・スタート・マニュアル (2 ページ)

Olympus CAMEDIA C-100 クイック・スタート・マニュアル
I
EXPOSURE COMPENSATION
This mode enables you to change the brightness of the image.
1 Press the
button with the lens barrier open to display the Camera menu screen.
2 Select [CAMERA] using the
/
3 Select [
] using the
/
buttons and press the
4 Adjust the compensation using the
(for a brighter image), and press the
5 Press the
button again to exit the menu.
6 Take the picture.
Close the lens barrier to return to 0.0 (default setting).
Note
I
METERING MODE (
1 Press the
button with the lens barrier open to display the Camera menu screen.
2 Select [CAMERA] using the
/
3 Select [
] using the
/
buttons and press the
4 Select the Metering mode setting using the
5 Press the
button again to exit the menu.
6 Take the picture.
• Metering mode settings
Note
ESP (No display)
The camera measures the light at the center of the
picture and around the periphery of the picture separately
and then selects the optimal exposure.
SPOT (
)
The camera measures only the light levels at the center
of the image, allowing you to obtain the correct exposure
for backlit subjects since the exposure is not affected by
the background light.
• Close the lens barrier to return to ESP (default setting).
I
WHITE BALANCE (
1 Press the
button with the lens barrier open to display the Camera menu screen.
2 Select [PICTURE] using the
/
3 Select [
] using the
/
4 Select the white balance using the
5 Press the
button again to exit the menu.
6 Take the picture.
• White balance settings
Note
Auto (no display)
Automatically adjusts the white balance to ensure natural
colors
Daylight (
)
Ensures natural colors outdoors in full daylight (sunny
weather)
Cloudy (
)
Ensures natural colors outdoors in overcast daylight
(cloudy weather)
Tungsten (
)
Ensures natural colors under tungsten lighting
Fluorescent (
)
Ensures natural colors under fluorescent lighting
• Close the lens barrier to return to Auto mode (default setting).
I
IMAGE QUALITY (SHQ, HQ, SQ1, SQ2)
1 Press the
button with the lens barrier open to display the Camera menu screen.
2 Select [PICTURE] using the
/
3 Select [
] using the
/
buttons and press the
4 Select the image quality using the
5 Press the
button again to exit the menu.
6 Take the picture.
• Image quality modes (pixel size)
Note
1280 × 960 pixels (For clear prints)
SHQ
1280 × 960 pixels (For viewing images on a PC)
HQ
1024 × 768 pixels (For e-mail attachments)
SQ1
640 × 480 pixels (For taking a lot of pictures)
SQ2
• The image quality setting remains when the lens barrier is closed.
I PLAYING BACK PICTURES
To turn the monitor on : Press the
button with the lens barrier closed to turn the monitor
on.
To turn the monitor off : Press the
button : Displays the previous image.
Note
button : Displays the next image.
button : Displays several images. Press the
If you press the
the previous image, and if you press the
next image.
button : Magnifies the image (1.5× → 2× → 2.5× → 3×). Press the
to return to 1×.
If you press the
is enabled.
Press the
or right.
Press the
I
ERASING AN IMAGE
1 Display the image you want to erase.
2 Press the
button for at least 1 second to display the menu.
3 Select [
] using the
/
buttons and press the
erased.
buttons and press the
button.
button.
button (for a darker image) and the
button.
)
buttons and press the
button.
button.
/
buttons and press the
)
buttons and press the
button.
buttons and press the
button.
/
buttons and press the
button.
buttons and press the
button.
button.
/
buttons and press the
button.
button again to turn the monitor off.
button to return.
button in multi-display, the green frame moves to
button, it moves to the
button while magnifying the image, scroll mode
/
/
/
buttons to move the image up, down, left
button again to exit scroll mode.
button. The image will be
I
ERASING ALL IMAGES
• When erasing images in the internal memory, do not insert a SmartMedia card.
• When erasing images on a SmartMedia card, insert the card before following the
Caution
procedure below.
1 Press the
button with the lens barrier closed.
button
2 Press the
button to display the Play menu screen.
3 Select [SETUP] using the
4 Select [
] or [
5 Select [
ALL ERASE] using the
6 Select [
] using the
will be erased.
Once erased, images cannot be restored. Before erasing, make sure that you are
not erasing important data.
Caution
I
PROTECT (
button.
1 Display the image you want to protect.
2 Press the
button for at least 1 second. The
Protected images cannot be erased by [Erasing an image] or [Erasing all images],
but they will all be erased by formatting.
Caution
• The protect setting is saved when the lens barrier is closed.
Note
• To cancel the protect setting, press the
I RECORDING/PLAYING BACK MOVING IMAGES ( )
Taking moving images
1 Press the
button with the lens barrier open to display the Camera menu screen.
2 Select [CAMERA] using the
3 Select [DRIVE] using the
4 Select [
MOVIE] using the
5 Press the
button again to exit the menu. The monitor will turn on.
6 Record the moving images by looking at the monitor. (Press the Shutter button to
start recording moving images. Recording stops when the Shutter button is pressed
again.)
Movie mode is canceled when the monitor is turned off by pressing the
Note
Playing back moving images
1 Press the
button with the lens barrier closed.
Display the image with the
2 Press the
button to display the Play menu screen.
3 Select [PLAY] using the
4 Select [
] using the
5 Select [START] using the
be played back.
I TURNING BEEP SOUND OFF
1 Press the
button with the lens barrier open to display the Camera menu screen.
2 Select [SETUP] using the
3 Select [
] using the
4 Select [OFF] using the
5 Press the
button again to exit the menu.
The beep sound setting remains when the lens barrier is closed.
Note
I ADJUSTING THE MONITOR BRIGHTNESS
1 Press the
button with the lens barrier open to display the Camera menu screen.
2 Select [SETUP] using the
3 Select [
] using the
4 Adjust the monitor brightness using the
monitor) and press the
5 Press the
button again to exit the menu.
The monitor brightness setting remains when the lens barrier is closed.
Note
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel.631-844-5000
(Technical support) Tel.1-888-553-4448 (Toll-free) (First 30 days after purchase)
(Technical support) Tel. 1-631-844-5520 (After 30 days)
OLYMPUS OPTICAL CO.(EUROPA) GMBH.
(Premises/Goods delivery) Wendenstraße 14-18, 20097 Hamburg, Germany. Tel. 040-237730
button
(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.
(Hotline Numbers for customers in Europe)
Tel. 01805-67 10 83
Tel. 00800-67 10 83 00
Tel. +49 180 5-67 10 83
Tel. +49 40-237 73 899
Our Hotline is available from 9 am to 6 pm (Monday to Friday)
Copyright © 2001 OLYMPUS OPTICAL Co., Ltd.
Printed in Japan
1AG6P1P1038-A
/
buttons and press the
] using the
/
buttons and press the
/
buttons and press the
/
buttons and press the
)
symbol will be displayed.
button again for at least 1 second.
/
buttons and press the
/
buttons and press the
/
buttons and press the
symbol indicated.
/
buttons and press the
/
buttons and press the
/
button and press the
/
buttons and press the
/
buttons and press the
/
buttons and press the
/
buttons and press the
/
buttons and press the
(for a darker monitor) or
button.
OLYMPUS AMERICA INC.
for Germany
for Austria, Belgium, Denmark, France, Netherlands, Norway,
Sweden, Switzerland, United Kingdom
for Finland, Italy, Luxemburg, Portugal, Spain, Czech
Republic
for Greece, Croatia, Hungaria and the Rest of Europe
button.
button.
button.
button. All the images
button.
button.
button.
button.
button.
button.
button. The image will
button.
button.
button.
button.
button.
(for a brighter
VT274602