デジタルカメラ Olympus CAMEDIA C-2 ZOOMのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Olympus CAMEDIA C-2 ZOOM 2 ページ。 Olympus camedia d-230: quick start
Olympus CAMEDIA C-2 ZOOM にも: クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)
![Olympus CAMEDIA C-2 ZOOM クイック・スタート・マニュアル](/uploads/products/server2/4261152/4261152.jpg)
QUICK START GUIDE
Thank you for purchasing an Olympus digital camera.
Please read the operation manual supplied with the camera carefully before using
your camera. We recommend that you become familiar with your camera by taking
a number of test shots before performing important shooting.
I PACKAGE CONTENTS
Check that your digital camera comes complete with the items listed below in the specified
quantities.
Digital camera ..................................................................................................... 1
Strap ................................................................................................................... 1
AA Alkaline batteries ........................................................................................... 2
SmartMedia card (16MB) .................................................................................... 1
USB cable ........................................................................................................... 1
CD-ROM (CAMEDIA Master and reference manual) ......................................... 1
Quick Start Guide ............................................................................................... 1
Basic Manual ...................................................................................................... 1
Warranty Card .................................................................................................... 1
I NAMES OF PARTS
3 4
2
1
6
7
5
1 Shutter button
8 Connector cover
2 Lens barrier
9 USB connector
3 Flash
0 DC-IN jack
4 Lens
A Monitor
5 Self-timer lamp
B Viewfinder
6 Card cover
C Orange lamp
7 Strap eyelet
D Green lamp
I ATTACHING THE STRAP
1 Pass the short end of the strap through the strap eyelet.
2 Pass the long end of the strap through the loop.
3 Pull tight and check that it is securely attached.
I LOADING THE BATTERIES
Check that the lens barrier is closed and both the monitor and the orange lamp are
off.
Caution
1
2
B
A
➜
1 Slide the battery compartment cover toward A and lift it up in the direction of B.
2 Insert the batteries as shown, making sure that they are correctly oriented.
3 Push down the battery compartment cover in the direction of the arrow C and close
firmly in the direction of D until it clicks.
C2-QSGuide-E.65E
All manuals and user guides at all-guides.com
DIGITAL CAMERA
C-2
D-230
9
A
B
8
0
G
F
E Arrow pad
F Tripod socket
G Monitor button
H OK/Menu button
I Battery compartment
cover
3
C
D
➜
1
I INSERTING THE SMARTMEDIA CARD
Check that the lens barrier is closed and both the monitor and the orange lamp
are off.
Caution
1
➜
1 Open the card cover.
2 Insert the card in the direction shown in the figure.
There is a mark inside the card cover, indicating the direction in which the card should
be inserted.
3 Close the card cover securely until it clicks.
I SETTING THE DATE AND TIME
1 Press the
button to turn the monitor on.
2 Press the
button to display the menu.
3 Select [SETUP] using the
4 Select [
] using the
5 Select the date format "Y-M-D (Year-Month-Day)", "M-D-Y (Month-Day-Year)" or "D-
M-Y (Day-Month-Year)" using the
6 Set the first figure using the
using the
button.
7 Repeat the above procedure until the date and time settings are adjusted.
8 Press the
button when the clock reaches 00 seconds.
9 Press the
button to turn the monitor off.
I TAKING PICTURES
To turn the camera on : Open the lens barrier. (You are now ready to take pictures.)
To turn the camera off : Close the lens barrier.
Never attempt to open the card cover or remove the card or batteries while the
C
orange lamp is blinking. Otherwise, the image data on the card may be destroyed.
Caution
Remember that it is impossible to restore image data once it has been destroyed.
D
Press the shutter button halfway A and then press it fully B.
Note
A
E
H
I
I
FLASH (
1 Open the lens barrier.
2 Check the current flash mode by pressing the
3 To change the setting, press the
Setting of the flash mode is completed.
Flash mode settings
Note
Auto (AUTO)
Red-eye (
)
Fill In ( )
Flash Off ( )
Night Scene (
Night Scene/Red-eye (
I
MACRO (
)
This mode is for taking close-up pictures at distance of 10cm-50cm (4in-1.6ft).
1 Open the lens barrier and press the
2 Press the
button again to set the Macro (
3 Take a picture by looking at the monitor.
I
DIGITAL TELE
This mode enables you to take pictures in six magnifications: 1.6×, 2×, 2.5×, 3.2×, 4× and 5×.
1 Open the lens barrier and press the
2 The image is magnified in the sequence [1.6× → 2.0× → 2.5× → 3.2× → 4.0× → 5.0×]
each time the
button is pressed.
The image is zoomed out in the sequence [4.0× → 3.2× → 2.5× → 2.0× → 1.6× →
OFF] each time the
3 Take a picture by looking at the monitor.
The image quality needs to be set to SQ2 to magnify 3.2×, 4× or 5×.
Note
I
SELF-TIMER ( )
1 Press the
button with the lens barrier open to display the Camera menu.
2 Select [CAMERA] using the
3 Select [DRIVE] using the
4 Select [
SELF-TIMER] using the
5 Press the
button again to exit the menu.
6 Press the shutter button.
The self-timer lamp on the front of the camera lights up for 10 seconds and then blinks
for 2 seconds, before the picture is taken.
8/9/01, 10:59 AM
2
3
➜
Card
insertion
direction
marking
/
buttons and press the
button.
/
buttons and press the
button.
/
buttons and press the
/
buttons, and then proceed to the next figure
B
➜
)
button.
button until the appropriate flash mode is displayed.
Automatically fires in low light or backlight
conditions.
Reduces the phenomenon of the subject's eyes
appearing red in the image.
Fires regardless of the light conditions.
Does not fire even in dark conditions.
)
For taking pictures at night.
)
For taking pictures of people against a night
background.
button to display the current setting [OFF].
) mode.
button to turn the monitor on.
button is pressed.
/
buttons and press the
/
buttons and press the
button.
/
buttons and press the
button.
button.
button.