- ページ 2

デジタルカメラ Olympus CAMEDIA C-3030 ZoomのPDF カメラマニュアルをオンラインで閲覧またはダウンロードできます。Olympus CAMEDIA C-3030 Zoom 3 ページ。 External flash or strobes not firing with olympus cameras
Olympus CAMEDIA C-3030 Zoom にも：パンフレット＆スペック (9 ページ), クイックスタート (2 ページ), マニュアル (30 ページ), トラブルシューティング (3 ページ)

ページを印刷する

• Timer: Set the self-timer by pressing the menu button, and then select

the drive option. Use the down arrow to select the self-timer, then press

OK to confirm, and OK again to close the menu.

Recommended Camera Settings for 360Plus

When taking 360x360 images, follow all of the above instructions, and the

additional instructions below.

Because the 360Plus uses 4 images, it is best to make sure that all 4 images

have the same exposure. This will ensure the end result will have a continuous

tone and density throughout the image. The best way to do this with the Olympus

C-3030 is to:

• Try to make the scene as evenly balanced with the same type of light as

possible. For example, close window shades to avoid harsh uneven

lighting, and turn on interior lights to try to balance the brightness.

• Set the white balance to a fixed setting. This will keep the camera from

shifting the white balance between shots if the scene has more than one

type of lighting. To do this, press the menu button on the back of the

camera, and use the down arrow to select WB, then the right arrow to see

the choices for pre-set white balance settings. Choose the correct pre-set

option according to the scene you are shooting. Your choices are

Outdoor/sunny, overcast, tungsten, and fluorescent.

• To make sure your exposure is even in all 4 shots, set the camera to

Manual Exposure mode. To do this, press the menu button, and then use

the down arrow until you see the A/S/M mode selection. Here, use the

right arrow to see the selections and choose M for Manual Exposure. Use

the OK button to finalize your selection. You can now use the UP/Down

arrows to change the shutter speed settings, and the right/left arrows to

change the Aperture settings. (These settings are shown in green

characters) We recommend using an aperture setting of f7.0, then adjust

the shutter speed until you have a properly exposed image. The exposure

value is displayed to the right of the camera settings in the LCD panel in

white numbers. If you are overexposed, the display will show a "+" with an

exposure value. Adjust the shutter speed until the Exposure value is close

to zero, or is not displayed at all. This will mean that your image will be

properly exposed. Keep this manual setting for all 4 of the images in the

Oneshot Plus set of images.

• Use the self –timer to remove yourself from the scene.

Doc. 000235, Rev. B

Camera

Guide

Olympus C-3030 Zoom

Page 2 of 3

EMOTE

EALITY

4 Technology Drive

Westborough, MA 01581-0756

866-898-1010