デジタルカメラ Olympus Camedia C-310ZOOMのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Olympus Camedia C-310ZOOM 2 ページ。 D-540 zoom quick start guide (portuguese)
Olympus Camedia C-310ZOOM にも: (ポルトガル語)クイック・スタート・マニュアル (2 ページ)
![Olympus Camedia C-310ZOOM クイック・スタート・マニュアル](/uploads/products/server2/4261555/4261555.png)
qsge_pquick.fm 1 ページ 2004年1月21日 水曜日 午後10時15分
1AG6P1P2013--
QuickStart Guide
D-540ZOOM / C-310ZOOM / X-100
START HERE
It is strongly recommended that you follow these step-by-step
numbered instructions to set up and quickly begin using your
new Digital camera.
For more detailed instructions on advanced features, please refer to
the printed Basic Manual included in your package, or the Reference
Manual on the CD-ROM.
PREPARING THE CAMERA FOR USE
Before you begin using your Olympus Digital camera...
a.
Loading the battery
Note: The batteries and xD-Picture Card
compartments are accessed by opening the
respective compartment covers.
• Make sure that the power switch is located at OFF.
• Slide the battery compartment cover to the direction of the
arrow, and lift open the cover as shown in the illustration.
• Insert the batteries into the compartment.
• Close the battery compartment cover so that it pushes the
battery in and slide the cover while pressing the
Note: If the battery compartment cover is hard to
close, do not force it. Press
to close the cover, and then slide it into position.
• To remove the batteries, make sure that the power switch is
located at OFF.
TURNING ON THE CAMERA
Only the operation of the power switch enables the camera to switch to the shooting mode, the playback mode and
power off.
a.
Turning the camera ON
(SHOOTING MODE)
• Slide the power switch to
, pressing and holding the lock button. The lens extends and the subject is displayed
on the monitor.
• To turn the camera off, slide the power switch to OFF.
Power on (Shooting mode)
TIP
To maximize battery life, the built-in power-saver operates, and the camera enters sleep mode after approximately three (3)
minutes of non-use.
b.
Setting the Date and Time
Set the date and time before using the camera for the first time. This affects the way image file names are
created, and will conveniently include this information with each picture.
• Slide the power switch to
. The camera turns on in the playback mode. The monitor will turn on with "NO
PICTURE" displayed in the monitor. The date and time can also be set when the camera is in the shooting mode.
• Press
to display the top menu.
• Press
to select MODE MENU.
• Press
to select SETUP, and then press
• Press
to select
, and then press
• Use
to select the date format.
• Adjust the date and time in the appropriate fields by using
Repeat this step until all date/time fields have been set.
Note: Time is entered using the 24-hour format.
• Press
twice to set the date and time and exit the menu.
c.
Camera Diagram and Controls
Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.
Strap eyelet
Self-timer control lamp
USB connector
USB
connector
cover
Card cover
Battery compartment
cover
VT791901
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville,
NY 11747-3157, U.S.A.
http://www.olympusamerica.com/support
The following items are also included in the Digital camera package: Basic Manual, warranty card, registration card (not provided in some
areas), and safety precautions booklet.
mark.
on the cover firmly
Power off
(OPTIONAL)
.
.
to select the field, and
Flash
Lens
Olympus Europa GmbH
Wendenstrasse 14-18,
20097 Hamburg, Germany
http://www.olympus-europa.com
UNPACKING THE BOX CONTENTS
Gather your Digital camera and the parts as shown in the illustration. You'll need these to complete the steps for the camera
set-up procedures that follow. The items, such as batteries, supplied with the camera may differ depending on the area you
purchase the product.
Digital camera
Strap
AA (R6) alkaline
BASIC MANUAL
batteries (2)
b.
Inserting the xD-Picture Card
The xD-Picture Card is where the camera stores your pictures
and is available in a variety of memory capacities. The pictures
you take with the camera remain on the xD-Picture Card even
when the camera is turned off and/or the batteries are removed.
• Open the card cover.
• Face the card the correct way and insert it into the card slot.
• Insert the xD-Picture Card into the spring-loaded card slot as
shown in the illustration. Push the card fully into the slot. The card
will lock into place when fully inserted.
• To remove, push the card all the way in to unlock it, then let it return
slowly.
• Close the card cover securely.
Confirm you have installed the battery and xD-Picture Card properly by sliding the power
switch to
.
The "NO PICTURE" message should be displayed in the monitor. Turn the camera off by
sliding the power switch to OFF.
c.
Attaching the strap
Attach the strap as illustrated to make the camera easier to
handle.
Viewfinder
to set the proper value.
Sequential shooting
DC-IN jack cover
DC-IN jack
Note: Depending on the camera settings, not all indicators will be displayed.
CAMEDIA Master CD-ROM /
USB cable
Software Installation Guide &
(gray color)
Image Downloading Guide
Monitor
(OPTIONAL)
Lock button
Shutter button
Power switch
Monitor
QUICK VIEW button
Arrow pad (
)
Macro button
Shooting mode button
Flash mode button
Self-timer button
Camera Settings in Shooting Mode as shown in Monitor
Shooting mode
Battery check
Green lamp
Flash stand-by
Macro mode
Flash mode
Self-timer
Record mode
Resolution
Camera Settings in Playback Mode as shown in Monitor
Battery check
http://www.olympus.com/
xD-Picture Card
/ Instructions
Contact area
Lens
Zoom lever
OK/Menu button
Tripod socket
Exposure compensation
White balance
AF target mark
Memory gauge
Number of storable
still pictures
Print reservation
Number of prints
Protect
Record mode
Resolution
Exposure compensation
White balance
Date and time
File number
(still picture)
Printed in Japan