- ページ 2

デジタルカメラ Olympus CAMEDIA C-8080 Wide ZoomのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus CAMEDIA C-8080 Wide Zoom 4 ページ。 C-8080 wide zoom quick start guide (portuguese)
Olympus CAMEDIA C-8080 Wide Zoom にも：クイック・スタート・マニュアル (2 ページ), 取扱説明書 (5 ページ), ユーザーマニュアル (47 ページ), (ポルトガル語）実践ガイド (2 ページ)

ページを印刷する

MEDIA LOAN

INSERTING & REMOVING FLASH CARD

To remove the Compact Flash card, turn Eject

Lever to upright

position and press

Eject Button, card

will eject a short way.

Grab the card and pull

out.

To insert, raise eject

lever and push card

inward until it clicks

into place. Be sure to

lower eject lever before

closing the card cover.

BASIC OPERATION

Turn the mode dial until the mode you want to

use is aligned with the red line and press the

power button to turn the camera on. (Note: the

camera will automatically turn off after 3 minutes

of inactivity.) There are several shooting modes:

a movie mode, a playback mode and a setup

mode. You can change the mode with the camera

turned on or off.

Tip: To select either the viewfinder or the

monitor, press the monitor button. Adjust the

angle of the monitor by gently pulling on the

ridges on the sides.

CONTROL DIAL

Every mode has corresponding settings which

can be accessed by using either the menu

button or the direct buttons on the left side of

the camera. The direct buttons have different

functions depending on whether the camera is

in playback mode or one of the shooting modes.

In the shooting modes, you can use the direct

buttons in combination with the control dial (to

the right of the viewfinder) to scroll through and

select options and menus that control the type

of metering, flash, focus, exposure, white

balance, recording mode, and the use of the

timer or remote control. To change these

parameters, hold down a button and turn the

control dial. The selection that is highlighted

at the moment you release the button is

now active. More options can be selected by

simultaneously pressing a direct button and

the OK button and then releasing the direct

button. You can then move through options

with the arrow buttons and then select one by

pressing the OK button again.

ZOOMING

You can zoom in and out on a subject you would

like to shoot by gently pushing the zoom lever

next to the mode dial towards either W (wide

angle) or T (telephoto).

FLASH

To use the flash press the flash pop-up button, set

the flash mode (using the flash direct button and

the control dial or the menu buttons). Depress the

shutter button halfway to prepare the flash for

firing. When the flash icon appears on monitor

the flash is ready to fire.

TAKING A PICTURE

To take a picture, compose the shot press the

shutter button gently (halfway) to have the

camera adjust the focus. The AF target mark

moves to the focus position. The shutter speed

and aperture value automatically selected by the

camera are displayed on the monitor (except in

M mode). Press the shutter button all the way

to take the picture. The card access lamp blinks

while the picture is stored on the card. You can

check the picture you have taken by pressing the

QUICK VIEW button.

SHOOTING MODES

P - Camera automatically selects an aperture

value and shutter speed. Other functions, such

as flash mode and record mode can be adjusted

manually.

A - Aperture priority shooting allows you to

set the aperture manually. The camera sets

the shutter speed automatically for a correct

exposure. If the aperture value is displayed in

red, the setting is unsuitable for the conditions.

The setting is suitable if the shutter speed is

displayed in green.

OLYMPUS C-8080