- ページ 12

デジタルカメラ Olympus DP30BWのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus DP30BW 31 ページ。 Microscope digital camera

Fig. 4

Fig. 5

When using a commercially available tripod

}The DP-TRAD tripod adapter is provided with two types of screws (2 each)

1. Insert the Philips screws ² into the DP-TRAD tripod adapter @ and, without

2. Tighten the Philips screws ² by inserting a Phillips screwdriver through the

3. Insert the tripod clamping screw into the tripod screw hole ƒ and tighten

# Prepare a tripod that can withstand the camera head (approx.

Connecting the Interface Cable

# Be sure to turn off the PC before proceeding.

# Lay the interface cable out away from heat-generating sections such

and an Allen wrench. Use only the Phillips screws (x 2) with the DP30BW.

tilting the tripod adapter, place it in position in the insertion slot ³.

guide holes |.

the screw.

2.7 kg). Make sure that the legs of the tripod are fully extended.

Connect the connector @ on the other end of the interface cable that is

already connected to the PC to the connector ² on the camera head

and tighten the connector's lock screws ³. Check that the interface cable

will not slip out.

as the lamp housing of the microscope.