- ページ 12

顕微鏡 Olympus BH2 SeriesのPDF 分解、清掃、再組み立てをオンラインで閲覧またはダウンロードできます。Olympus BH2 Series 45 ページ。 Phase contrast
Olympus BH2 Series にも：トラブルシューティング＆調整マニュアル (46 ページ), 完全な分解、洗浄、再組み立て (23 ページ), 完全な分解、洗浄、再組み立て (40 ページ), マニュアル (6 ページ), インストレーション・マニュアル (9 ページ)

Unscrew and remove the knurled outer barrel from the

stationary inner barrel of the thumbscrew (see

16). Do not try to remove the stationary inner barrel.

Figure 16 – Unscrew and remove knurled outer barrel

Clean Components of the Locking Screw (BHS/BHT)

Use a cotton swab and a suitable solvent to remove any

grease or other contaminants from the exposed threads

and from the outer surface of the stationary inner

barrel of the locking thumbscrew (see

Figure 17 – Clean the outside of stationary inner barrel

Use a pipe cleaner and a suitable solvent (acetone) to

remove any grease or other contaminants from the

bore of the stationary inner barrel of the locking

thumbscrew (see

Figure

Figure 18 – Clean the bore of the stationary inner barrel

Teardown, Cleaning, and Reassembly of the Miscellaneous Parts of the Olympus BH-2 Microscope Frames

Figure

17).

18).

Use a cotton swab and a suitable solvent (acetone) to

Figure

remove any grease or other contaminants from the

surface of the plunger rod (see

Figure 19 – Thoroughly clean the plunger rod

Use a pipe cleaner or cotton swab, with a suitable

solvent (acetone) to remove any grease or other

contaminants from the inner threads and from the bore

of the knurled outer barrel of the locking screw (see

Figure

20).

Figure 20 – Clean threads and bore of the outer barrel

Use an acid brush and a suitable solvent (acetone) to

wash the extension spring, or soak the extension spring

in a suitable solvent to remove any grease or

contaminants (see

Figure 21 – Wash the grease from the extension spring

Figure

19).

Figure

19).

Revision 1

Page 12 of 45