- ページ 12

顕微鏡 Olympus BHS-312のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus BHS-312 22 ページ。 System microscope
Olympus BHS-312 にも：取扱説明書 (22 ページ)

ページを印刷する

Olympus

objective

engraved

'160/0.17"

requires a cover glass of 0.17mm

thickness.

If the numerical

aperture of the objective is 0.7 or higher (except immersion objectives) and

no correction collar is provided, the resolving power deteriorates to a great extent if cover

glass thickness deviates from the above

listed value.

NOTE:

In some countries a 0.17mm

cover glass corresponds to a designation of #1%.

A cover glass (0.4mm

thick)

for blood counting, etc. can be used with Olympus objectives

of the working distance longer than 0.4mm.

(See VI.

OPTICAL

DATA at page 16.)

[Specimen Slide

®@

Specimen

slides 0.8mm

to 1.2mm

thick are

recommended

for Olympus objectives.

3) Bring the portion of the specimen for obser-

vation

into the

light

path

means

of the

low drive control knobs. (Fig. 9)

Tighten the stage clamping screw © in the

microscope front.

[Stage

standard specimen slides simultaneously.

@ The specimen holder is removable to obtain

a large

unobstructed

stage

surface

to hold

specimens up to 55mm x 85mm.

To rotate the stage loosen the stage clamping

screw ©

and holding this screw, rotate the

stage into the desired direciton.

(Fig. 9)

O Stage clips @®, for use with immersion objec-

tives.

(Fig. 10)

A pair of stage clips are optionally

available

to hold the specimen on the stage, eliminat-

ing a specimen drag caused by immersion oil

between

slide and

stage surface.

The clips

can

be inserted

into the holes provided

the specimen holder.

Fig. 10