- ページ 2
顕微鏡 Olympus BHS-312のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus BHS-312 22 ページ。 System microscope
Olympus BHS-312 にも： 取扱説明書 (22 ページ)
ページを印刷する
This instruction manual has been written for the use of the Olympus System Microscope Model
BHS.
It is recommended that you read the manual carefully in order to familiarize yourself fully
with the use of the microscope, so that you can obtain optimum performance from it.
IMPORTANT
Observe the following points:
m
Operation
Always handle the microscope with the care it deserves, and avoid abrupt motions.
Avoid
the use of the microscope in direct sunlight, high temperature and humidity, dust
and vibration.
Only
use the tension
adjustment
ring for altering
the tension
of the coarse adjustment
knobs.
(Do not twist the two coarse adjustment knobs in opposite directions simultaneous-
ly, as this will cause damage.)
Make sure that the voltage selector switch on the base plate is set to conform with the local
mains voltage.
Make it a point of grounding the microscope to prevent electric accidents.
m
Maintenance
1.
Lenses must always be kept clean.
Carefully wipe off oil or fingerprints deposited on the
lens surfaces with gauze moistened with a small amount of xylene, alcohol or ether.
Do
not
use organic
solutions to wipe
the surfaces of various components.
Plastic parts,
especially, should
be cleaned with neutral detergent.
Never
disassemble the microscope for repair.
Only authorized Olympus service personnel
should make repairs.
The microscope should be covered with the vinyl dust cover provided and stored in a place
free from humidity.