ページを印刷する
Safety Symbols
The following symbols are found on the microscope. Study the meaning of the symbols and always use the equip-
ment in the safest possible manner.
Symbol
l
Warnings
Warning engraving/stickers are placed at parts where special precaution is required when handling and using the
microscope. Always heed the warnings.
Should warning stickers become soiled, peeled off, etc., contact Olympus for replacement.
1
Getting Ready
Fig. 3
2
Indicates that the surface becomes hot, and should not be touched with bare hands.
Before use, carefully read the instruction manual. Improper use could result in personal injury to
the user and/or damage to the equipment.
Indicates that the main switch is ON.
Indicates that the main switch is OFF.
Warning engraving
position
Warning sticker
position
1. A microscope is a precision instrument. Handle it with care and avoid
subjecting it to sudden or severe impact.
2. Do not use the microscope where it is subjected to direct sunlight, high
temperature and humidity, dust or vibrations. (For the operating condi-
tions, refer to section 6, "SPECIFICATIONS".)
3. When moving the microscope, remove the specimen and modules that
may drop during transport and carefully carry it with the grasping part
on the rear of the arm and the base as shown in Fig. 3 (Weight: approx.
14 kg).
# Damage to the microscope will occur if you grasp it by the stage,
coarse/fine adjustment knob or binocular section of the observa-
tion tube.
4. The BX45 can be used with only one intermediate attachment.
Explanation
Lamp socket
(Warning against high temperature)
Microscope frame rear panel
(Warning against high temperature)