- ページ 2

顕微鏡 Olympus Discover FV10iのPDF システムの特徴と利点をオンラインで閲覧またはダウンロードできます。Olympus Discover FV10i 2 ページ。 Laser scanning confocal microscope

ページを印刷する

FV10i

SYSTEM FEATURES AND BENEFITS

No experience is required with the FV10i, even for sophisticated confocal imaging.

The navigation function leads a first-time user to operate the FV10i with ease.

FV10i-LIV

Simplified Built-in Incubator

The system has a simplified built-in incubator, allowing easy

time-lapse imaging of live cells without losing valuable time

in setting up equipment. The environment in the culture

chamber is maintained at temperature - 37 degrees Celsius,

humidity of - 90%, and CO

Dedicated Culture Pod

The system is provided with a dedicated culture pod for

dia. 35mm cover glass bottom dishes. Recirculation of the

culture media and addition of reagents during time-lapse

is possible. In addition, the culture pod system can be

autoclaved for sterilization.

Stable Time-Lapse Imaging

Not only the incubator but also the surrounding air space

is maintained at 37 degrees Celsius. Long-term time-lapse

imaging is possible while maintaining cell activity.

Water is Automatically Supplied to the

Water-Immersion Objective

The newly developed automatic water dispensing system

enables the FV10i to supply water to the top of the water-

immersion objective. You can continue long-term time-lapse

imaging without worrying about insufficient immersion

media. Water is supplied automatically when the objective is

moved into the observation position.

Detection of Cover Glass Thickness and Automatic

Adjustment of the Correction Collar

The system is equipped with the capability to detect the

thickness of the cover glass, allowing it to adjust the

correction collar automatically, when using the water-

immersion objective. This assures imaging is performed

each time with optimal conditions.

The System Supports Multi-Area Time-Lapse

The system is equipped with a motorized stage, and repeat

imaging is possible through multi-area time-lapse. Ten point

locations can be assigned within a single dish (well). For

example, in the case of a dia. 35mm glass bottom dish,

three dishes can be mounted, allowing a maximum of up to

30 locations to be captured.

www.olympusamerica.com

concentration of - 5%.

ol ympus america inc.

3500 Corporate Parkway, Center Valley, PA 18034-0610, U.S.A.

ol ympus canada inc.

25 Leek Crescent, Richmond Hill, Ontario L4B 4B3

FV10i-LIV/FV10i-DOC

Equipped with Four Wavelength Diode Lasers

for Imaging up to Five Channels

The system is equipped with four (405/473/559/635nm)

lasers. Multi-stained specimens can be imaged with up to

four fluorescence dyes. Transmitted light phase images can

also be acquired. Maintenance-free and power-saving diode

lasers with longer operating lives are employed in all the laser

units, and operate with low noise levels.

Detector Utilizes a Newly Developed Spectrum Method

The detecting mechanism has two fluorescence channels,

and one phase contrast channel. The fluorescent channels

use a newly developed spectrum method comprising grating,

beam splitter, and slit. In addition, they are equipped with

the variable barrier filter function where the most suitable

wavelength width is set automatically in accordance with the

characteristics of the fluorescence dye.

Objectives of 10

and 60

The system is equipped with 10x and 60x phase objectives

specifically designed for the FV10i to maintain high resolution.

By changing lens and scanning zoom, magnification can be

changed continually from 10x to 600x. The most suitable

imaging area can be set depending on size of the specimen.

Software dedicated for exclusive use for FluoView is provided

to easily perform various editing / analysis operations.

• Olympus and FV are registered trademarks of Olympus Corporation, Olympus America Inc., and/or

their affiliates, in the U.S. and/or other countries.

• Images on the PC monitors are simulated.

• Specifications and appearances are subject to change without any notice or obligation on the part of

the manufacturer.

olympus latin america inc.

5301 Blue Lagoon Drive, Suite 290 Miami, FL 33126, U.S.A.

are Mounted on the System

Printed in USA. FV10IFLYER12.06