- ページ 11

顕微鏡 Olympus DP26のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus DP26 36 ページ。 Microscope digital camera
Olympus DP26 にも：取扱説明書 (36 ページ)

11. If the exposure time is set less than 1/15 seconds, the LIVE image cannot be displayed by the frame rate

more than 15fps.

12. The traceability of auto white balance control deteriorates when the specimen contains little white area.

13. If the microscope light source is set too bright, color unevenness may occur in photographed images.

Should this be the case, adjust the brightness to an appropriate level (for example, by lowering the lamp

voltage or by inserting a neutral filter).

14. To prevent destruction of the recorded image (data), never perform the following action during recording

of a still image or movie;

• turning power OFF;

• disconnecting the AC adapter;

• disconnecting the camera cable;

15. When combining to CX or CKX, set the light volume of the microscope illumination closer to the

maximum level in order to gain the best color reproduction.

Getting Ready

1. The camera head uses precision components. Handle it with care and avoid subjecting it to a sudden

or severe impact. Also note that the microscope does not have a waterproof construction.

2. The image displayed on the monitor may be affected when it is used near equipment generating strong

electromagnetic waves. To avoid interference during operation, keep the system far from any source of

electromagnetic waves.

3. Do not use the camera in areas where it may be subjected to direct sunlight, high temperature and

humidity, dust or vibrations. (For the operating environment conditions, see "SPECIFICATIONS" on page

19.)

DP26