顕微鏡 Olympus IX71のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Olympus IX71 11 ページ。 Microscope z-axis motor drive
Olympus IX71 にも：パンフレット＆スペック (16 ページ)

2022/01/10 05:45

Olympus IX71 Microscope Z-Axis Motor Drive

Installation

This procedure steps you through the installation and alignment of the ASI's IX71 Z-axis motor drive

onto the Olympus IX71 microscope.

Typical diameter of threaded end of Olympus 4 mm ﬁne focus shaft

ASI oﬀers Z-Drives with drive shafts for both 3 mm and 4 mm versions

Applied Scientiﬁc Instrumentation - https://asiimaging.com/docs/

1/11

NOTE: On January 2007 Olympus changed the size of the

threaded end of their ﬁne focus shaft from 3 mm to 4 mm.

Microscopes with serial numbers '7Axxxxxx' and newer, and

all 8-digit versions, identify the 4 mm version. The threaded

shaft diameter can also be directly measured after the left-

hand ﬁne-focus knob has been removed. This installation

manual applies to both versions.

Olympus IX71 Microscope Z-Axis Motor Drive Installation