- ページ 17

顕微鏡 Olympus SZX10のPDF 概要をオンラインで閲覧またはダウンロードできます。Olympus SZX10 24 ページ。 Research high-class stereo microscope
Olympus SZX10 にも：取扱説明書 (36 ページ), 取扱説明書 (40 ページ)

ページを印刷する

Transmitted/Reflected light illumination base

Transmitted light guide adaptor (SZX-TLGAD)/

Light guide (LG-SF)

As the light guide LG-SF power source is mounted away

from the transmitted light illumination base, increases in

illuminator surface temperature are prevented.

Dual inter-lock light guide (LG-DI)

This light guide can be positioned as the observer likes

for bright, even illumination - especially effective when

high-contrast images are required. The spot lens HLL301*

can be mounted.

Coaxial illuminator

(SZX2-ILLC16/SZX2-ILLC10*)

Used with the dual flexible light guide LG-DF*, this

illuminator provides bright, even illumination without the

need for centering adjustments to the lamp.

* Compatible with the SZX10 only.

Equipment answering various needs

Dual combination light guide (LG-DFI)

The SZX2 light guide can be mounted directly onto the

focus drive, keeping the observation position properly

illuminated even when focus is adjusted or when the

specimen is exchanged.

Ring light guide (LG-R66)

With its ø66mm diameter mount, this ring light

illuminator has been specially developed for

stereomicroscope compatibility. When mounted with ring

light adapter SZX-LGR66*/LGR66, it provides bright,

uniformly lit images especially avoiding glaring

reflections or obscuring shadows.

Accessories

Light beam splitter (SZX2-LBS)

The adapter allows a digital camera or

other imaging unit to be attached on

both sides of the SZX2-LBS body. The

light path to the camera port is switched

between 100% and 50% light. The 100%

light path to the camera port enables

image capturing of dark specimens.

Simple polarizer (SZX-PO)

and analyzer (SZX2-AN)

This simple polarizer should be used

with a transmitted light illumination

base. It provides double-refractile

image observation of such specimens

as sea urchin larvae. Analyzer should

be attached on the tip of objectives.