- ページ 13

顕微鏡 Olympus SZX10のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus SZX10 36 ページ。 Research high-class stereo microscope
Olympus SZX10 にも：概要 (24 ページ), 取扱説明書 (40 ページ)

ページを印刷する

4-3 Observation Tube

Fig. 8

Fig. 9

Zoom Magnification Indication Sticker (DFPLAPO1.25X Only)

} The DFPLAPO1.25X objective is provided with a sticker that indicates a set of total

magnifications available* during observation.

* When a 10X eyepiece is used.

} Affix the sticker securely to the knob. Otherwise, the sticker may peel off during use.

} Affix the sticker while paying attention to the roundness of the knob.

} The zoom magnification indication sticker can only be affixed to the right zooming

knob.

# Affixing of the sticker blocks the body zoom magnification indication of a 1X

objective.

1. Turn the zooming knob to align the minimum magnification ("0.63") with the mark-

ing.

2. Peel the back off the zoom magnification indication sticker 1 and affix it so that the

"0.63" indication the right zooming knob is overlaid on the "0.8" indication of the

sticker 1.

Adjusting the Interpupillary Distance

# Be sure to hold the binocular assembly @ with both hands to make

this adjustment.

To prevent damaging the mechanism, do not apply an excessive

force beyond the stop position.

While looking through the eyepieces, hold the left and right of the bin-

ocular assembly @ and adjust the eyepieces by opening or closing

them for binocular vision until the left and right fields of view coincide

completely.

Adjusting the Diopter

(Zoom Parfocal Adjustment)

}Ensure that the eyepiece clamping knob @ is tightened before starting

the adjustment.

Adjusting the diopter specific to the two eyes of each observer allows

the parfocality to be ensured across zoom magnifications.

When Not Using the Eyepiece Micrometer Disk

1. Look into the right eyepiece and rotate its diopter adjustment ring ² so

that the peripheral part of the visual field looks sharply.

2. Place an easy-to-observe specimen on the stage plate.

3. Rotate the zooming knob ³ to a low magnification and, looking only

into the right eyepiece, focus the specimen using the coarse and fine

focus adjustment knobs.

4. Rotate the zooming knob ³ to the highest magnification and, looking

only into the right eyepiece, focus the specimen using the coarse and

fine focus adjustment knobs.

5. Rotate the zooming knob ³ to the lowest magnification, look only into

the left eyepiece, and focus the specimen by rotating the left diopter

adjustment ring | instead of the coarse and fine focus adjustment knobs.

SZX10

(Fig. 8)

(Fig. 9)