- ページ 5

顕微鏡 Olympus SZX16のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus SZX16 40 ページ。 Research high-class stereo microscope
Olympus SZX16 にも：概要 (24 ページ), 取扱説明書 (36 ページ), 取扱説明書 (28 ページ)

ページを印刷する

IMPORTANT

SAFETY PRECAUTIONS

Downloaded from

ManualsNet.com

search engine

1. After the equipment has been used in an observation of a

specimen that is accompanied with a potential of infection, clean

the parts coming in contact with the specimen to prevent infection

· Moving this microscope is accompanied with the risk of

dropping the specimen and causing infections. Be sure to

remove the specimen before moving this product.

· In case the specimen is damaged by erroneous operation,

promptly take the infection prevention measures.

· The microscope may become unstable when certain

intermediate attachments and/or photography unit are

mounted on it. Take the measures so that the microscope does

not turn over.

2. To prevent the microscope body from turning over, its left-right pivot

angle must be limited to 30° as shown in figure. The tilt of the

desktop surface should be no more than 5°.

3. Sufficient care is required during observation with a low-magnification

objective, because the objective's long WD (Working Distance) can

displace the microscope body to a higher position.

The measures for prevention of turning over are also required when

using an auxiliary pillar (SZH-P400/P600), because this also makes

the microscope body to be displaced to a higher position.

4. To adjust the microscope body height, be sure to hold the

microscope body with one hand while loosening the focusing

assembly clamping knob a .

(Use the drop prevention collar (SZX-R) to prevent a hazard from

occurring.)

Be careful not to pinch your finger during the adjustment.

SZX16