- ページ 20

顕微鏡 Olympus U-BI30-2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus U-BI30-2 36 ページ。 Motorized illumination system with motorized focusing unit

4-4 Differences in Operating Procedures of Software BX2-BSW

}The BX2-BSW software has been designed for controlling the motorized operations of the BX61 microscope system.

When the illuminator is controlled from the BX2-BSW, some operations may differ from the information shown in the

operation screens, tutorial and help of the software as described below.

1-2-2 Initial setting

2. Motorized unit setting (Device Type)

· Frame

· Reflected light illumination

· Filter wheel

· Autofocusing unit

· Focus adjustment knob unit

(Note)

Text "enabled when the focus adjustment knob unit is installed" should be deleted.

3. Observation method setting (Microscopy Tab)

· Check only "EPI BF" (reflected light brightfield observation) and "EPI DF" (reflected light darkfield observation).

4. Mirror unit setting (Mirror Unit Tab)

· Enter "BF" or "DF".

6. Turret optical device and top lens setting (Condenser Tab)

· Do not register anything.

7. Filter setting (Filter Tab)

· The U-FWT cannot be used.

1-2-4 Button function allocation

1. Button selection

Main Unit Tab

· Allocation to all of buttons 1 to 8 is possible with the PC screen operation.

· Even when button functions are allocated on the main unit, standalone operation on the main unit is impossible

(because the buttons are not present).

Other caution

· The microscope illustrations in the operation screens show the BX61.

Focus adjustment range setting

· The relationship between the objective moving direction and the Near/Far Limits is identical to that of the BX61WI.

· The height values entered as the Near and Far Limits cannot exceed the lower hardware limit (which is adjustable).

Enter "BX61F" or "BX61WI". (Any can be entered without problem.)

BX-RLAA

U-FWR (The U-FWT cannot be used.)

U-AFA1M

U-FH