- ページ 12
アンプ AXIXTECH SAF205HのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。AXIXTECH SAF205H 16 ページ。 Electronic handheld siren
ページを印刷する
OPERATIONS
POWER (ON/OFF)
The unit can be activated by applying positive voltage to the ENA terminal in the amplifier.
Normally, this is wired to the ignition switch of the vehicle; it can also be wired to another switch
to act as ON/OFF. See "AMPLIFIER CONNECTIONS" diagram.
SIREN CONTROLS
There are 5 buttons in the middle area of
the handheld controller dedicated for
primary operating modes of the siren.
Function modes
Modes
Standby
(no mode selected)
RADIO
HF
SIREN
HF – This is a standby mode dedicated for HRT (Horn Ring Transfer). When installing the unit, the
auxiliary input must be connected to the horn ring or other switching device. Tap the horn ring or
MAN button once to activate Wail tone, then tap again to activate Yelp tone, and quickly tap the
horn ring twice to shut off siren tone. By setting DIP-SW2-1 on, pressing and holding the horn ring
will produce Horn tone until released, then the siren will return to its previous siren tone.
HF settings
Press Horn Ring:
HRT tap once
(MAN press once)
HRT quickly tap twice
(MAN quickly tap twice)
HRT press +0.5 secs
Standard
MANUAL / SHORT MANUAL
SILENT
see DIP-SW2-4 SHORT_MAN
RADIO
SILENT
WAIL
(see Siren Mode)
PHASER_D off
HILO off
SILENT-> WAIL->
YELP-> PHASER
MAN
HORN
HF
SIREN
RADIO
+ MAN button
RADIO
CYCLER
(see HF settings)
YELP
(see Siren Mode)
HILO on
SILENT-> WAIL->
YELP-> HILO
SILENT
SILENT
(with DIP-SW2-1 off)
HORN
(with DIP-SW2-1 on)
- 11 -
LV1
MAN
SW1
+ HRT trigger
HORN / SILENT
see DIP-SW2-2 HRT_STBY_D
HORN / RADIO
s
ee DIP-SW2-2 HRT_STBY_D
CYCLER
(see HF settings)
YELP
(see Siren Modes)
PHASER_D on
HILO off
HILO on
SILENT -> WAIL -> YELP
SAF205H Siren_v.1
LV3
LV2
HORN
HF
SIREN
RADIO
SW2
SW4
SW5