- ページ 13

顕微鏡 Olympus U-UVF248のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus U-UVF248 24 ページ。 248 nm uv microscope unit

SUMMARY OF VISIBLE/UV LIGHT OBSERVATION PROCEDURE

}Before turning on the system, be sure to close the shutter by setting the shutter selector lever of the UV248 light source

box to the bottom position (marked {).

Turn on the system.

Visible light observation

UV observation

1. Switch on the power supply for mercury/xenon burner (by setting the

power switch to " " and then setting the start switch to ON).

2. Switch on the microscope.

3. Switch on the TV camera/monitor for UV observation.

4. Switch on other set-up modules.

1. Set the light path of the reflected light illuminator to the BF position.

2. Engage a low-power objective for visible light observation in the light

path.

3. Place a specimen and adjust the focusing and brightness.

4. Engage a high-power objective for visible light observation and adjust

the focusing and brightness.

1. Set the light path of the reflected light illuminator to the DF position.

2. Engage the MApo100X objective for UV observation.

3. Set the shutter selector lever of the UV248 light source box to the upper

position (marked \).

4. Observing the monitor, adjust the focusing and brightness.

(Operation)

U-UVF248