- ページ 7

カメラアクセサリー Olympus PPO-E05のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus PPO-E05 9 ページ。 Underwater lens port for the pt-e

Maintenance

For safe use of this product, always perform maintenance after each diving session.

For details, refer to "Handling After Shooting" and "Maintaining the Waterproof Function" in the PT-E series

case instruction manual. Apply the same procedures to this product.

After shooting, remove the inserted cam-

era and lens, then re-seal the empty

case and immerse it in tap water to

remove any salt as soon as possible.

Insert the O-ring remover between the

O-ring and O-ring groove so that the tip

of the O-ring remover slides under the

O-ring (take care not to damage the

groove with the tip of the O-ring remover).

When the O-ring is raised, pinch it with

your fingers and separate it from the case.

If any foreign matter is attached to the

O-ring grooves, remove it using a

clean, lint-free cloth or cotton swab.

Also remove any foreign matter from

the O-ring contact surfaces and from

the port mount thread on the PT-E

series case.

After making sure that the PT-E series

case is completely dry, dismount this

product from the case.

Remove any dust that you can see from

the O-ring, and then pinch the O-ring

with your fingers and rub it along its

length to check for foreign objects such

as sand, damage and cracks.

After removing foreign matter, apply the

provided grease to the O-rings and fit

them into the O-ring grooves.

To apply grease to each O-ring, squeeze

a drop of grease about the size of a

grain onto your finger and lightly rub the

entire circumference of the O-ring to

spread the grease thinly and evenly.

E-6