ページを印刷する3. Install the digital camera
Check the digital camera
Check the digital camera before loading it in the Case.
1. Battery Confirmation
The flash is used very frequently during underwater shooting.
Before diving, make sure that you have enough remaining battery power.
2. Confirmation of the Remaining Number of Pictures to be Taken
Confirm that the image storage has a sufficient remaining number of
pictures to be taken.
3. Remove the hand strap from the digital camera.
When a digital camera is loaded without removing the strap, the strap may
get caught between the Case lids and may cause water leakage.
Open the Case
1 Slide and hold the slide lock towards the arrow direction (1 of figure below)
and turn the open/close dial counter clockwise (2 of figure below).
2 Turn the open/close dial to the position where it cannot be turned further.
3 Open the rear lid of the Case gently.
CAUTION:
Do not exert too much force while turning the open/close dial. Doing so may
damage the dial.
1
Slide lock
2
Open
Open/close dial
EN
EN 15