- ページ 17

カメラアクセサリー Olympus PT-056のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Olympus PT-056 30 ページ。 Olympus underwater case instruction manual

How to Apply Grease to the O-ring

Apply the exclusive

lubricant to each

O-ring.

Spread the lubricant

all over the O-ring.

Check that the O-ring

is free of scratches or

unevenness.

CAUTION:

• Always perform maintenance of the waterproof function even when the

Case has been opened every shooting. Neglecting this maintenance may

cause water leakage.

• When the Case is not to be used for a long time, remove the O-ring from

the groove to prevent deformation of the O-ring, apply a thin coat of silicone

grease, and store it in a clean plastic bag or the like.

Examples of foreign matter sticking to the O-ring

Hair

Make sure that your fingers and the O-

ring are free of dirt, then squeeze the

appropriate amount of exclusive

lubricant onto a finger to spread onto the

entire circumference of the O-ring

(approx. 15 mm is adequate).

Apply the lubricant with 3 fingers and

spread it over the ring. Be careful not to

use force as this may stretch the O-ring.

After spreading the lubricant, check

visually and by touch that the O-ring is

not scratched and that its surface is flat.

If it is damaged in any way, be sure to

replace it with a brand-new O-ring.

Fibers

Grains of sand

EN 17