ページを印刷する
14
If you have installed Rekid in the back seat
you can now move the front seat to a com-
fortable position. The back of the child re-
straint can, but is not necessary, be in contact
with the back of the front seat.
Adjusting the internal harness
Place your child in the car seat. Put your
child's arms in between the shoulder straps
so that the straps are hanging over the chest
and stomach. Pull the shoulder straps to-
gether and insert the harness tongues into
the crotch buckle. Pull the harness adjust-
ment strap (11). It´s important that you
always pull the harness straight and central
when you tighten the adjustment strap.
This will tighten the harness and the head-
rest will automatically slide down to the
appropriate height. To release the harness,
press the harness adjustment button and
pull both harness straps. Press the red but-
ton on crotch buckle to disengage buckle.
Parking brake on headrest
The headrest on your Rekid is
equipped with a parking brake. This
could be used if you want the headrest in a
fix position. To activate the parkingbrake,
pull the harness until the headrest is at
the desired height, you will hear a "click"
sound from the headrest as it locks into
position. Make sure that the headrest can
not be pulled down. Activate the brake
by moving the lever (14) on the headrest
across to the right. Do not pull up the
headrest with the parking brake activated.
11
10
12