ページを印刷する
2.
Fold up the horizontal arm and balance arm and turn the rotation tension
adjustment handle clockwise to clamp them (see Figure 4.2).
Figure 4.2
3.
Hold the projecting part the stand and push it forward to move the floorstand
base (see Figure 4.3).
Figure 4.3
COLPOSCOPE OCS-500
Rotation tension
adjustment handle
•
Take care that the floorstand base does not roll over your
foot, as it could cause injury.
•
Do not grasp the microscope body or use excessive force
when moving the colposcope. Doing so can damage the
lens, preventing normal observation through the microscope.
Projecting part
Take care that your fingers do not get caught in the floorstand
base as they could be injured if caught.
Chapter 4 Operation
13