- ページ 29

ラボラトリー機器 Olympus MX61AのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Olympus MX61A 48 ページ。 Motorized 300 mm compatible semiconductor/fpd inspection microscope

SETUP OF MX-OPU61A OPERATION UNIT

}To operate the control panel, touch the desired switch on the screen with a fingertip (a glove acceptable or a commer-

cially available touch pen also acceptable).

· Select switch: When this kind of switch is touched, the switch is displayed in green to indicate that it is selected. (The

STAGE ESC switch is displayed in red when it is selected.)

· Screen switch: When this kind of switch is touched, the screen is switched to the next screen.

· Adjustment switches: When this kind of switch is either touched shortly or held for a longer period, the selected value

is varied upward or downward.

· Grayed-out switch: This kind of switch is defeated because no function is set for the switch or the module assigned for

the switch is not set or not controllable.

}When any of the CONFIG 1/6 to 6/6 screens is displayed, the MX-HS61A hand switch cannot be used except for the jog

dial.

}By pulling out the tilt legs on the bottom surface, you can adjust the installation angle of the touch panel surface.

# Do not apply excessive force to the touch panel and the tilt legs (when pulled out) of the MX-OPU61A. Doing so

could break the touch panel surface.

MX61A