ページを印刷する
QUICK START GUIDE
ALPHA-STIM M: EARCLIPS
1
Power Button
3
Timer
5
Change Intensity
(Channel 1)
Intensity Level
(Channel 1)
1. Power on device
2. Set frequency to 0.5 HZ
3. Set timer to 20 minutes if the
current is at 2.5 or higher or 1
hour if the current is at 2 or lower
4. Apply one Earclip to each
earlobe (pre-wet with conducting
solution)
5. Increase current until a slight
dizzy feeling is experienced, then
decrease immediately until the
dizziness stops
For how-to videos, visit www.alpha-stim.com/training
For free clinical support, call 1-800-367-7246
IFU-QG-001
®
[
4
2
Frequency
Lock
Change Intensity
(Channel 2)
Intensity Level
(Channel 2)
BEFORE YOU START
Clean ear lobes with mild
soap and water, alcohol
pads or antibacterial wipes
and allow skin to dry
Saturate new Earclip
Electrode Pads (EEPs™)
thoroughly with several
drops of conducting solution
ALWAYS COMPLETE
YOUR TREATMENT
When the timed session
ends, and a "heavy"
feeling is still experienced,
resume treatment until
heaviness lifts and a light
feeling develops
AFTER TREATMENT
Remove and discard
earclip pads
Clean earclips with
alcohol, let dry, and
replace 4 earclip pads for
the next treatment