- ページ 8

サンダー Axminster BS100のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Axminster BS100 17 ページ。 Belt sander

check their functioning.

Function tests shall be done before commissioning. These include the verification of

running conditions of belts, running speed and stop button.

2.7 Safety regulations for operation

Do not put the machine into operation before you get acquainted with the contents of the

instructions for use.

Only use the machine when it is in perfect conditions. Make sure that electric cables

are not damaged. Make sure all electrical components in perfect conditions.

Before starting-up the machine, make sure that all parts have been properly mounted

and secured and no foreign objects are putted on the machine. Make sure that no

person is working on the machine before starting-up.

Do not put the machine into operation with the guards removed.

Do not remove safety devices such as guards.

During machine operation, listen whether you hear abnormal noise. If any happens,

stop the machine, find out the cause and solve it in time.

For JSG150A/220A, the speed adjustment must be done only when the machine

stops.

Always keep the working area clean.

It is not recommended to work on the machine during a storm.

Any maintenance work must be done by a qualified staff in accordance with the

instructions issued by the machine manufacturer. Never do maintenance works before

you get acquainted with the instructions for maintenance thoroughly.

Before you start to perform any maintenance work, always unplug the plug from

power supply.

Do not clean the machine even if the machine is completely out of operation, unless

the plug is taken off from power supply.

While changing electrical parts of the equipment, unplug the plug from power supply

firstly. Faulty parts should be replaced only with products having the same

specifications as the original ones.

Do not remove guards. If there is no way of avoiding that the safety devices be

suspended or removed during maintenance, the machine must only be used by

specially authorized personnel. The persons must ensure that personal injury and

machine damage are prevented.

Do not use the machine before all safety devices removed for the purposes of

maintenance are put in their places again.

Always keep the maintenance area clean.

Never put any tool or any other objects on the machine during maintenance.



Every machine we produce is fitted with a name plate with its serial number. The number

is also punched on the machine.

An exact description of the machine model and serial number will facilitate rapid and

effective replies from us.

8 / 16