- ページ 2

デジタルカメラ Axon Body 4のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Axon Body 4 2 ページ。 And flex pov module

ページを印刷する

CAMERA

DISPLAY

Status Icon

Battery capacity

Battery charging

Low battery (battery level is 10% or less)

Battery not charging due to high temperature. The cam-

era will continue to operate normally and resume charging

when the camera cools down.

Paired with Axon View mobile app

Moisture detected in the side POV port or bottom USB-C

port. Camera will continue to operate normally, but en-

sure it is dry before docking or connecting a POV module.

Stealth mode on

Lights off

IN-FIELD CAMERA DISPLAY

Mode or Action

Buffering

Buffering with POV (R/L orientation)

Recording

Recording with POV (R/L orientation)

Livestreaming

Watch Me

Voice Comms

Axon Signal Activation

Audio mute during recording

Sleep mode

Pairing mode

IN-DOCK CAMERA DISPLAY

Mode or Action

Badge ID

Displays right after docking, when the

camera is charging, and for 10 seconds

after undocking.

Uploading videos

Displays number of videos on the camera,

upload speed, and upload time remaining.

Updating firmware

Camera will resume normal operation after

update.

Firmware update complete

Displays for 10 seconds after the update

is complete and for 10 seconds after

undocking.

Network error

Troubleshooting instructions at

help.axon.com.

Battery charging

Triad LED colors are different based on the

charge level.

Axon, Axon Body, Axon Evidence, and Axon View are trademarks of Axon Enterprise, Inc., some of which are registered in the US and other countries. For

STATUS

ACTIONS

Description

Display

Top LED

Blinking green

Blinking red

Blinking purple

Blinking red

Blinking blue

Off

Blinking blue

Display

Triad LED

Spinning yellow

Spinning white

Green: > 90%

Yellow: 11%-89%

Red: <10%

USING THE AXON FLEX POV MODULE

The Flex POV module can be registered and assigned by scanning the QR code on

the side of the POV module with ADM.

When a Flex POV module is connected to a user's camera

for the first time, Axon Body 4 will prompt the user to set

the POV orientation.

Determine the orientation of the POV module using the

letter on the top of the module when mounted.

Once set, update orientation using the camera menu.

Double-press SELECT and select

Or, set orientation in the Axon View mobile app.

AXON RESPOND

Axon Body 4 is capable of livestreaming audio and video and sending real-time

location to Axon Respond. Axon Body 4 also offers new capabilities:

• Watch Me: Configure PROGRAMMABLE BUTTON 1 to start a recording and

send a request to Axon Respond that a user would like their camera to be

livestreamed.

• Voice Comms: Livestream viewers can now speak directly to a camera wearer

using the Talk button in Respond, and camera wearers can communicate back

completely hands-free.

OPTIMIZED BATTERY CAPACITY

If this setting is enabled, Axon Body 4 cameras will only charge to ~90%

capacity and display FULL instead of 100%. Analyze your battery needs during the

first few weeks of use. If users do not require the full 100% of battery, this setting

will improve long-term battery health with only a minor reduction in runtime.

PROGRAMMABLE BUTTONS

Programmable Buttons 1 and 2 are agency-configurable in the Axon Body 4 Settings

page. Button 1 is activated with a double press. Button 2 can be either single press

or long press depending on the configuration.

For example, if PROGRAMMABLE BUTTON 1 is configured as Sleep, double-

pressing Button 1 will put the camera in Sleep Mode.

END RECORDING CONFIRMATION

This feature prevents unintentional ending of recordings. If enabled, ending a

recording will require a secondary confirmation press of SELECT.

• Always – Confirmation always required

• Auto – Confirmation only required if EVENT is pressed during a recording

AXON VIEW (IOS OR ANDROID)

Use the Axon View mobile application to play video and add metadata (Case ID,

Title, and Category). In addition, Axon View can share highly accurate mobile

phone location with Axon Body 4. Axon recommends setting Axon View location

permissions to ALWAYS to use this capability.

1. Open Axon View, select an Axon Body 4 camera, sign into your Evidence.com

account, and tap Initiate Pairing.

2. With the Axon Body 4 camera powered on, press SELECT and EVENT at the

same time.

3. Follow the on-screen instructions on the Axon View application to pair your

camera to Axon View.

AXON VIEW XL STANDALONE (WINDOWS)

Use the ViewXL Standalone desktop application to play video and add metadata.

Administrators can use View XL Standalone to register and assign cameras.

After signing into Axon View XL and selecting Standalone Mode, connect the

camera to the computer using an Axon-supplied USB-C cable.

POV Orientation

Rev: 11 Sep 2023