- ページ 2

ドッキングステーション Axon Body 2のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Axon Body 2 2 ページ。
Axon Body 2 にも: クイック・スタート・マニュアル (2 ページ), クイック・ヒント・マニュアル (6 ページ), クイック・スタート・マニュアル (2 ページ)

Axon Body 2 クイック・スタート・マニュアル

Status LED

When you plug your camera into the Axon Dock, the camera status LED
displays the device status.
Device Status
Initial connection (momentary)
In queue awaiting upload
Device ready (all videos uploaded
successfully) and fully charged
Device not assigned, agency
mismatch, camera set in the offline
mode, or device error
Uploading data
Firmware update, internal battery
charging, extremely low battery, or
memory full
Transfer error, device re-trying to
transfer
Possible network error. Refer to the
Troubleshooting chapter of the User
Manual.
Axon Dock has no communication
with the camera
Notifications
The camera emits beeping sounds called audio prompts to notify you of the system status. These audio prompts usually occur after you perform
an action with the camera. For some actions, the camera also vibrates while making an audio prompt.
Powering on or off
Recording an event
Press the battery button while the camera is recording
The device is ending an event and returning to BUFFERING mode
Low battery notifications:
Camera in BUFFERING mode and battery has power for 20 minutes or less
(the camera will not record)
Camera in EVENT (recording) mode and battery nearly discharged (the
camera will shut down within a few minutes)
Camera memory is full (the camera will not record)
Camera internal clock is not set
Using Axon View
The Axon View application enables you to replay video and add
metadata (GPS, title, case ID, and category) to your
videos using a smart phone or multimedia player.
1. Using your smart device, download the Axon View
application from the Google Play store or the iTunes
App Store. Search Axon View.
2. On your smar t device, open the A xon View
application and follow the onscreen instructions.
Note: All data is stored on the Axon camera. No
videos are stored on your smart device.
Bluetooth is a trademark of the Bluetooth SIG, Inc.; Google Play is a trademark of Google, Inc.; iTunes is a trademark of Apple, Inc.; iOS is a trademark of Cisco Systems,
Inc.; and Windows is a trademark of Microsoft Corporation.
,  AXON, Axon, Axon Body 2, Axon Dock, Axon View, Evidence.com, and Evidence Sync are trademarks of Axon Enterprise, Inc., some of which are registered in
the US and other countries. For more information, visit www.axon.com/legal. All rights reserved. © 2017 Axon Enterprise, Inc.
Status LED
Solid red (for 20 seconds or fewer)
Solid yellow
Solid green
Blinking red
Blinking yellow
Blinking red and yellow – DO NOT
remove the camera from the Axon
Dock
Blinking green and yellow
Blinking red, yellow, and then green
(cycling all colors)
LED off
Operating Mode
Recharging the Battery and Uploading Data
If you do not have an Axon Dock, upload video with a Windows
compatible computer using Evidence Sync: Axon.com/syncdownload.
1. Ensure the Axon Body 2 camera is off.
Insert the camera into the Axon Dock as
shown. The dock automatically uploads
data to Evidence.com services, deletes
videos from the camera, and charges the
camera. (The camera must be registered
to your Evidence.com account.)
2. At the beginning of the next shift, ensure
that your camera (if one has been
assigned to you) displays with a green
upload status LED before removing it
from the dock.
Audio
One beep
Two beeps (every 2 minutes)
Two beeps
One long beep
Four quick beeps (every 20 seconds)
Three beeps
Five quick beeps (every 20 seconds )
Pairing the Axon Body 2 Camera with a Smart Device
1. Turn on the Axon Body 2 camera.
2. Wait until the Function LED is not lit anymore.
3. Hold down the Function and EVENT buttons
for 5 seconds.
4. Wait until you hear four beeps. The Function
LED will blink green.
5. On your smart device, follow the onscreen instructions.
MPC0205 Rev: G
Vibration
Once
Twice (every 2 minutes)
None
Once, long duration
Four times, quickly (every 20 seconds)
Three times
Five times, quickly (every 20 seconds)