ページを印刷する8 . P O S S I B L E F A U L T S A N D T H E I R S O L U T I O N S
Alphard amplifiers are high-quality and technically perfect products. The problems often arise due to improper operation,
faulty connection of components or lack of power supply of the on-board network.
1) The amplifier does not turn on.
Problem solution: Check all the contacts and the presence of the amplifier 12 V at the terminals. Check whether the control
input of the amplifier "Remote in" receives the positive potential of 12 V.
2) Power turns on, but goes into protection (security indicator lights up)
Problem solution: Check if there is a short circuit (fault) on the amplifier output which is connected to the speakers or
subwoofers. Make sure that commutation of the coils of the subwoofer is correct. The rated resistance of the coils should not be
lower than the permissible rated load impedance of the amplifier. Check the supply voltage of the amplifier. It must be within the
range of 12-15 V for 12 V versions.
3) The amplifier turns on but at a high volume it goes to protection. Problem solution: The amplifier may lack power. Make sure
that the rated current of the generator and the battery capacity is enough to provide the amplifier with the increased
consumption.
Check the amplifier for overheating. Check the load resistance.
4) The amplifier is turned on, but there is no sound from the speakers or subwoofer.
Problem solution: Check the connection of the amplifier, the integrity of the interconnecting cable, HU, the speaker or the
subwoofer.
9 . B O X C O N T E N T
1. Amplifier – 1 pcs.
2. Owner's Manual – 1 pcs.
3. Warranty card – 1 pcs.
4. Mounting Kit – 1 pcs.
1 0 . W A R R A N T Y A N D M A I N T E N A N C E .
Alphard products are warranted, under normal functioning conditions, for the period of time as set by the laws in
force, against defects concerning materials or their manufacturing. The warranty is valid from the date of purchase,
certified by receipt. The warranty is not valid if:
∙ the product is damaged by incidents, installations and/or improper use, or by any other causes not depending on
materials or manufacturing defects;
∙ the product is modified or tampered with by unauthorised people;
∙ its serial number has been altered or removed.
While the product is under warranty, defective parts will be repaired or replaced at the manufacturer's discretion. The
defective product, along with notification about it, must be returned to the dealer from which it was purchased together
with the warranty certificate duly filled in,
warranty, it will be repaired at the current costs.
Alphard does not undertake any liability for damages due to transportation. Alphard does not take any responsibility
for: costs or loss of profit due to the impossibility to use the product, other accidental or consequential costs, expenses or
damages suffered by the customer. Warranty according to laws in force. For more information visit the Alphard website.
The manufacturer reserves the right to change design and specification without prior notice.
1 1 . I N F O R M A T I O N O N D I S P O S A L O F T H E E L E C T R I C A L A N D
E L E C T R O N I C E Q U I P M E N T ( F O R T H E E U R O P E A N C O U N T R I E S W I T H
S E P A R A T E W A S T E C O L L E C T I O N ) .
Items marked "crisscrossed wheeled bin" are not allowed to be disposed of together with usual household waste. These
electrical and electronic products should be disposed of in special reception centers, equipped for recycling such products and
components. For information about the location of the nearest disposal / recycling spot and the rules of delivery of waste please
contact your local municipal office. Recycling and proper disposal help protect the environment and prevent harmful effects on
health.
complete with the original packaging
en.alphardaudio.ru
. If the product is no longer under
EN